Manual

ManualsBrandsWEATHER GUARD ManualsCar114-X-01 THRU 156-X-01

• reluR•hcnerW tehctaR "2/1

(1) Saddle or Cross Box

(1) Tray with Dividers

(2) Level Holder Brackets (saddle box only)

(2) Rubber Mounting Pads

(2) Keys

(4) 5/16”-18 x 2-1/4” Hex Head Bolts

(4) Fender Washers

(4) Mounting Clamps

Approximate installation time: 30 minutes (1/2 hr.) depending on installer experience.

OPERATORS MANUAL

STEEL & ALUMINUM SADDLE BOX

STEEL & ALUMINUM CROSS BOX

MODELS 114- X -01 THRU 156- X -01

WWW.WEATHERGUARD.COM

Note: The rubber mounting pad comes as

a single piece and must be separated into

two pieces, one for each side of the truck.

Read and understand all instructions and warnings before operating or using this product.

Danger of explosion. Do not use this product for storing or transporting ammables, explosives, hazardous materials, or hazardous

waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. This

product is only intended and safe for use in storing and transporting small tools, equipment and other similar materials. Any modi-

cations made to, or unintended use of this product, could create a hazardous condition that can cause death, serious personal

injury or property damage.

DANGER

–

ATTENTION

–

INSTALLATION TIME

T OOLS REQUIRED

PARTS LIST

PRODUCT REGISTRATION

For your convenience,

place product registration

tear-o sticker here

Model #:_____________ Serial #:_______________

Purchase Date: __________________

Place of Purchase: _______________

Key Code: ______________________

Part No. 24-0156 REV. C ECN 5305 04/13

Summary of content (4 pages)

PAGE 1
OPERATORS MANUAL STEEL & ALUMINUM SADDLE BOX STEEL & ALUMINUM CROSS BOX MODELS 114- X-01 THRU 156- X-01 WWW.WEATHERGUARD.COM PRODUCT REGISTRATION Model #:_____________ Serial #:_______________ For your convenience, place product registration tear-off sticker here Purchase Date: __________________ Place of Purchase: _______________ Key Code: ______________________ INSTALLATION TIME Approximate installation time: 30 minutes (1/2 hr.) depending on installer experience.
PAGE 2
INSTALLATION INSTRUCTIONS Note: • If your pickup is fitted with a plastic drop-in bed liner, it may need to be drilled, trimmed, or cut for proper installation of truck box. • Truck box cover may not properly latch until box is fully bolted to truck bed (4) places. • Because truck bed configurations vary, (6) mounting slots have been provided, to ensure the use of (4) mounting clamps. • Periodically check tightness of mounting clamps to insure proper attachment.
PAGE 3
FEATURE OPERATION (cont.) LATCH SYSTEM The WEATHER GUARD® Latch System utilizes automotive grade latches in conjunction with high strength latch strikers to ensure maximum security. The WEATHER GUARD® Latch System is designed to open with a single touch of the button, and close securely. Expect years of reliable service from the WEATHER GUARD® Latch System with only minimal maintenance: Lubricate latch pivot points bi-annually with white grease.
PAGE 4
SERVICE PARTS FOR REPLACEMENT PARTS GO TO WWW.WEATHERGUARD.COM ITEM PART DESCRIPTION FITS NO. NO.