Installation Instructions

User manaul

1、 need to be used with the host, the first use needs to pair, press 2H and 4H double key

pair code at the same time.

2、the remote control with code indicator light, light up when pressing the button, after the

code is successful, the remote control press the button to receive the buzzer will respond.

3、The remote control button is as follows:

key

assignme

nts

FAN ON/OFF

Short press to turn on the fan, short press again to

turn off the fan

0x11

1 (-)

Wind a

0x12

2 (MID)

Wind speed second gear

0x13

3 (+)

Wind speed three gears

0x14

LIGHT ON/OFF

Short press release to turn on the light, short press

again to turn off the light

0x0B

Long press detected

0x0E

Continue to long

0x0C

Long press let go

0x0D

F/R

Switch the fan is working in positive or negative

mode

0X0F

Turn off lights and fans after 2 hours countdown

0x08

4 hours to turn off lights and fans

0x09

combination key

2H+4H Press at

the same time

Boot to code

0x05

PAGE 1
User manaul 1、 need to be used with the host, the first use needs to pair, press 2H and 4H double key pair code at the same time. 2、the remote control with code indicator light, light up when pressing the button, after the code is successful, the remote control press the button to receive the buzzer will respond.
PAGE 2
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two condi tions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.