User Guide User Guide AT&T U-verse TV Point Anywhere RF Remote Control ® ZIMRC3033 Rev.
Congratulations on your new AT&T U-verse TV Point Anywhere RF Remote Control. The remote, with the USB converter, eliminates the need to point your remote control at the AT&T U-verse Receiver in order to change channels or access any of the receiver’s features. This universal remote control allows you to control up to three additional devices, such as a TV, DVD player, or audio device. It even has the ability to “learn” commands from existing remote controls.
Getting started Blu-Ray/DVD Cont’d Kenwood 20534, 20490 Craig 20831 KLH 20717, 20790 Curtis 22235, 23403, 23052, 21493 Lexicon 22545 Curtis Mathes 22331, 23925 LG 20741, 21602, 22135, 20869 Daewoo 20833, 20869 LiteOn 21738, 21158, 21416 Denon 22258, 21634, 22748, 23851, 20490 Logitech 22639 DigitalMax 21738 Magnavox 20675, 21354, 20503, 20646, 23488, 21506, 20539 Digix 22464, 23850 Marantz 22481, 22414, 20539, 23444 Directed Video 20717 McIntosh 21273 Disney 20675, 21270
Program your remote Program your device using one of the methods below: • • • • Program your remote control for popular brands Program your remote control using auto search Program your remote control using manual setup Program your remote control using the learning feature Program your remote control for popular brands Program your remote to control popular devices, including a TV, DVD, Blu-ray, home theater receiver, or sound bar. Ensure the protective battery strip has been removed.
Step 3: Sound bar/AUDio Accessory Cont’d Home Theater Receiver B&W 33965, 32441, 33943 Aiwa 30121, 31641, 30158, 30189 Bose 33708 Alco 31390 Boston Acoustics 33698 AMC 31077 Bowers & Wilkins 33965, 32441, 33943 Anam 31609 Apex Digital 31774, 31257 Curtis 33942 Arcam 31189, 30189 Definitive Technology 33645 Audiotronic 31189 Denon 32502, 34025 Audiovox 31390 Dynavox 33231 Bose 31933, 31629, 33959 Haier 33516 Carver 30189, 30121, 31189 Harman/ Kardon 33517 Coby 3138
Step 2: Press the mode key associated with the device – Press the mode key (TV, DVD, or AUX) for the device type you wish to set up. The mode key will light up red and stay lit. NOTE: AUX is the default mode key for audio devices. Step 3: Press and hold the FAST FORWARD key – While pointing the remote at your device, press and hold down the FAST FORWARD key. Let go of the key as soon as the device turns off (for a TV or DVD) or mutes (for an audio device).
Step 3: Television CONT’d Philco 10171, 11665, 11963, 11394 Memorex 11570, 11670, 11938, 11892, 10463, 11665, 10060, 10150, 10877, 11687, 11924, 11927 Philips MGA 10150 11867, 12372, 11454, 12374, 12597, 11455, 12708, 11744, 11866, 10017, 13623, 10171, 11365, 11990, 11394 MicroTEK 13951 Pioneer 11457, 10679, 11260, 11398 Midland 10017, 10051 Planar 10679, 10877, 11589 Mintek 11603, 11990 Polaroid Misakai 10171 Mitsubishi Electric 11250, 11797, 10150, 10093 11523, 11769, 11276, 11538
Step 4: Press the key you want to learn – Press the key on the Point Anywhere RF Remote Control that you want to learn a command. The green LED indicator READY TO LEARN will flash green rapidly when the remote is ready to accept the new command. NOTE: The learning function will time out after 10 seconds of inactivity. Step 5: Press the key you want to learn from – Next press the corresponding key from the device’s original remote to send the command you want to learn.
Programming codes Claris 13807 Coby 13478, 13627, 12315, 12344, 12306, 12314, 12345, 11634, 12338, 12326, 12340, 13629, 12350, 11538, 12347, 12348, 13202, 12560, 13646 Television Turn off keypad backlighting By default, your remote control is set with the backlight on. Here’s how you can turn it OFF or back ON again. Step 1: 888 14159 Acer 11339, 14143 Commercial Solutions 11447 Press the AT&T mode key.
Step 3: Enter pairing mode – Press and hold the OK and MENU keys simultaneously for three seconds until all four mode keys flash red twice and you hear two short beeps to confirm you are in programming mode. Step 4: Enter 9 6 6 – Using the numeric keypad on the remote, enter 9 6 6. The AT&T mode key will flash red twice, indicating the remote is ready to receive the Home ID.
Get to know your remote Power key (AT&T U-verse service) Mode keys (AT&T, TV, DVD, AUX) Access the latest On Demand content Step 2: Choose your favorite channels and watch four at once Explore, entertain, and interact with U-verse Apps Content navigation Record TV with one click Go to Main Menu screen Return to previous screen Picture-in-Picture channel browsing Jump forward & backward in set increments Access the Options menu shortcuts On-screen navigation Enter Pairing Mode – Press and hold the OK and
Change back to RF control (activate RF Control) If you want to reactivate the RF control, follow the instructions below: Step 1: Enter pairing mode – Press and hold the OK and MENU keys simultaneously for three seconds until all four mode keys flash red twice and you hear two short beeps to confirm you are in programming mode. Step 2: Enter 9 6 9 – Using the numeric keypad on your remote, enter 9 6 9. The mode key will flash red twice to confirm it’s in pairing mode.
