Certification Exhibit FCC ID: KJ8-0001543 IC: 3540A-0001543 FCC Rule Part: 15.231 IC Radio Standards Specification: RSS-210 ACS Report Number: 08-0038 Manufacturer: Wayne Dalton Corp Model: KEP-IV Manual 5015 B.U.
Wireless Keyless Entry Model KEP-IV Operating Instructions and Owner’s Manual Control Garage Door Opener and HomeSettings Home Controls System with a secure Personal Identification code (PIN) Thank you for purchasing the Wireless Keyless Entry (KEP-IV). The Wireless Keyless entry, uses a state of the art rolling code radio frequency (RF) transmitter to control compatible peripherals.
Warning/Glossary Definition of Symbol Warning Installation Safety Precautions Never let children operate or play with door controls. Keep remote controls away from children. Fatal injury could result should a child become trapped between the door and the floor. Always keep moving door in sight and keep people and objects away until it is completely closed. To prevent serious injury or death, avoid standing in the open doorway or walking through the doorway while door is moving.
To program the KEP-IV to an Opener or to change an existing PIN: 1. With new installations, it is recommended to program the KEP-IV before mounting to wall, otherwise proceed to Step 2. 2. Unit can be programmed with garage door in either up or down position. 3. Press the transmitter PROGRAM BUTTON on DoorMaster® light fixture, idrive®, prodrive®, Quantum® or Classicdrive® opener. LED will light or idrive® opener will beep once indicating that it is ready to learn a transmitter.
Quick Sta rt Mounting the KEP-IV With new installations, the KEP-IV should be programmed before mounting to wall. 1. Choose a convenient location that does not interfere with the normal opening and closing operation of the door, such as the door jamb, but is within sight of the door. Mounting CAUTION: MOUNT THE KEP-IV A MINIMUM OF 5 FEET FROM THE FLOOR TO KEEP IT OUT OF THE REACH OF SMALL CHILDREN. KEP-IV WIRELESS KEYLESS ENTRY 2.
Operation/Battery Replacement Quick Sta rt KEP-IV Operation with Opener To OPEN, CLOSE, START, and STOP your garage door opener: 1. Activate your keypad by pressing the ON/ OFF/RESET button. The keypad will illuminate. 2. Enter the 4 digit PIN (personal identification number) for the garage door opener you want to operate. The opener will begin to move the door. 2 ON/OFF/RESET 1 3.
To program a PIN to a Scene button on the Wireless Gateway, WDHA-12R, or to reassign a PIN to a Scene button: LEDs Scene Scene Scene Copy 1 2 3 Delete 2. Open the cover of the KEP-IV, then push the ON/OFF/RESET button of the keyless entry. The Keyless Entry keypad will light indicating it has been activated and is waiting for commands (illumination may not be visible in direct sunlight.
Examples of KEP-IV / Gateway Use 1. Deck/Patio/Barbecue Area: Mount the KEP-IV in a convenient location and pair it with the Gateway to control outside lighting. Use it to turn on or off your flood lights and landscape lighting and control pre-configured dimmed mood Scenes.
Limited Warranty Wireless Keyless Entry Model: KEP-IV Warranty/Compliance Subject to the terms and conditions contained in this Limited Warranty, Wayne-Dalton Corp. (“Manufacturer”) warrants the Wireless Keyless Entry, including electronic components (Batteries are not warranted), which is described at the top of this page, for a period of ONE (1) YEAR from the date of installation against: (i) Any defects in material or workmanship.