User Manual

Contact Us www.waybasics.com/contact
version 1220
THIS SIDE UP
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
1 Backer Board
4 holes for pins
2 Horizontal zBoards
2 Vertical zBoards
6 holes for pins
16 Pins
Included
BLOX CUBE
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
• Do not place unit on its side or back as it will compromise it’s structural intergrity
• Indoor use only. Not in bathroom
1 2
3
4 5
Place alignment pins in
vertical zBoards and backboard.
Start assembly from bottom to top.
Align vertical zBoards and backboard
to holes in the horizontal zBoard.
Align horizontal zBoard and press
firmly to secure unit together.
When moving the unit, first empty
contents. Lift the cube from the bottom
zBoard to keep adhesives intact.
Carefully remove the 3M
protective layer from adhesive.
6
The Blox Storage Cube can be stacked
for your custom configuration.
Enjoy building possibilities!