Instructions / Assembly

Help and Comments www.waybasics.com/contact
version 0419
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Important
2
1
3
6
4
Carefully remove the protective
layer on the Back and Vertical
zboards, making sure not to
remove the 3M adhesive.
Insert pins as shown.
Align Back zBoard to holes
in the Bottom zBoard.
Align Vertical zBoards to
holes in the Bottom zBoard.
32 Pins
4 Vertical zBoards
adhesive strips on 2 edges
of each zBoard
1 Middle zBoard
holes on top and bottom
2 Backer Boards
adhesives strips on 2 edges
2 Horizontal zBoards -
top and bottom
holes on one side only
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
Included
2 SHELF CUBBY (with backer board)
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
Align Middle zBoard as shown.
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
1
1
4
5
Align Back zBoard to holes
in the Middle zBoard.
6
6
Align Vertical zBoards to
holes in the Middle zBoard.
7
6
Align Top horizontal zBoard
as shown and press firmly
to secure unit together.
Enjoy building possibilities!
8
1
2
2
1
3
THIS SIDE UP