User Guide

ManualsBrandsWAVLINK ManualsComputer Accessories & PeripheralsUSB 3.0 to SATA I/II/III Dual-Bay Hard Drive Docking Station for 2.5/3.5 Inch HDD,SSD with UASP (6Gbps), Support Offline Clone/Backup/UASP Functions

Hard drive installation steps

a. Connect DC power adapter with docking station

b. Connect docking station with computer by USB cable

c. Insert HDD into slot of docking station correctly.

Power on, lower right comer of computer will have a mobile hardware prompt after device

recognized, disk management will also have one.

Systems Compatible

No drivers are required for the disk dock itself as it uses the standard USB Mass Storage class

support already provided in Windows 10 through XP, Mac OS X, and Linux / Unix

Please update your usb 3.0 xHCI host controller drivers before using the device, for best

performance and stability

Windows XP can supports is 2TB and couldn’t be identified by system if over 2TB. It only

supports after upgrading the operating system above Vista (64 bit) version

Summary of content (8 pages)

PAGE 1
Hard drive installation steps a. Connect DC power adapter with docking station b. Connect docking station with computer by USB cable c. Insert HDD into slot of docking station correctly. Power on, lower right comer of computer will have a mobile hardware prompt after device recognized, disk management will also have one.
PAGE 2
we suggest changing hard disk into a GPT disk partition, or the operating system will not support over 2 TB disk partitions.
PAGE 3
Please note that new/blank disk drives must be initialized, partitioned, and formatted. Mac and Windows computers cannot read Linux/Unix formatted hard drives (commonly found in network attached storage 'NAS' devices) without special software. Instruction for the removal of drivees Please note: Before the removal of the data storage device, please stop all data access and transfer to the device, so that the storage can be normally removed. Forced removal may lead to damage or loss of crucial data.
PAGE 4
b.
PAGE 5
drives / devices”, choose the menu function “Remove” from the drop down menu by right clicking onto the symbol. You may also drag the “Portable device” to the rubbish bin. Now, the device can be safely removed . Partition and Formatting If your HDD has been partitioned, please connect directly with docking station to use. It will be showed “New Disk” in computer.
PAGE 6
2. In the New Simple Volume Wizard, click Next, according to the desired partition resize disk partition size, and select Next, specify the disk drive letter, Click Next, select the file system, enter the volume label, and select Disk formatting way, click Next, click Finish, the disk will be formatted. Above, the operation can be repeated according to disk size. 3.
PAGE 7
Hard Drive Duplicator Function HDD A----Source HDD HDD B----Target HDD 1.Make sure there are no connection on the USB. 2.Ensure the Power Switch on the rear is in the OFF Position and plugged in properly. 2. Insert the HDD A in the rear near the power plug and insert the HDD B in the front. 3.Offline clone is from HDD A to HDD B. Make sure your Main Drive is in HDD A and slave in HDD B. The capacity of HDD B must be equal or bigger than HDD A. 4.
PAGE 8
f. Please do not remove your hard drive or insert a new one while the other hard drive is being accessed, as doing so the other drive temporarily disconnects and this could damage your hard drive and result in data loss.