User Manual Model: SmartSensorTM 105 10.
FCC COMPLIANCE THIS EQUIPMENT COMPLIES WITH PART 15 OF THE FCC RULES. ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Proprietary Copyright Wavetronix, LLC. All rights reserved. Wavetronix products are covered under U.S. and foreign patents, issued and pending. Specifications change privileges reserved. SmartSensorTM is a register trademark of Wavetronix, LLC. Technical Support and Product Information www.wavetronix.
Contents Wavetronix, LLC 3 SmartSensor 105 User Manual
Unpacking The smart sensor packaging should include the following items: 1. SmartSensor 105 Detector 2. Mounting Plate 3. (5) Mounting Screws 4. Sensor Cable (Customer Specific Length) 5. User Manual 6. CD with Software If any of these items are missing record the serial number located on the side of the sensor and contact the Wavetronix Support at ??.
Installing Physical installation of the SmartSensor • • • • • • Choose a location for the sensor to be mounted. The sensor can be mounted on a vertical or horizontal placed pole or on a flat vertical surface (i.e. wall, billboard, etc.). It is recommended that the mounting location be a distance 15-22.5 ft from the nearest point of interest and mounted 20-30 ft above road level as illustrated in figure 1. There are 2 available brackets to choose from.
Software Configuration Tracking Installations Trouble Shooting Wavetronix, LLC 6 SmartSensor 105 User Manual
Upgrading Firmware Specifications Warranty Wavetronix, LLC 7 SmartSensor 105 User Manual
Notes Wavetronix Customer ID Number: _____________________ Serial Number: _____________________________________ Date Installed: __________ Installation Site: ______ Wavetronix, LLC 8 SmartSensor 105 User Manual
Part Number: XXXXXXXXX BARCODE Wavetronix, LLC 9 SmartSensor 105 User Manual