User Manual

135188 V1.1 REAL TIME RESOURCE CONTROL 9 JANUARY 2001 Page 1 of 3
Link-it™
Product Information Sheet
Active Tag
L-TG100 (Domino Tag)
L-TG101 (Domino Tag with Movement Sensor)
Description:
The Link-it™ series of Active Tags are
powered by an internal battery. The Tag will,
for the duration of its life, transmit a Radio
Frequency (RF) signal at a pre-set time-interval.
The Tag life is estimated at 5 years at a
transmission time interval of approximately 15
seconds. The lifespan of the Tag ends when the
battery life is exhausted. Battery status can be
inferred by interrogating the internal Tag Age
Counter Value.
The transmitted Tag data includes Customer Site Code (CSC), Tag ID, Tag Age
Counter Value, Movement Alarm and Tamper Alarm status.
For protection against adverse environmental conditions, Link-it™ Tags are
encapsulated in a moulded plastic case, which is ultrasonically sealed during the
manufacturing process.
The Domino Tag is generally used for asset tagging. The mounting and affixing of a
Tag depends on the type of application. The standard method is by VHB type double-
sided adhesive tape.
The Tag can be configured to accommodate Wiegand interfacing.
Features:
•
Configurable settings, including Site Code Vendor ID, Tag ID, Transmission
Repetition Interval and Alarm functions (these are programmed at order
placement stage)
•
Low power consumption. Tag life is estimated at 5 years when transmitting at a
15-second interval.
•
A random dispersion around the transmit interval mean is used to minimise the
inter-tag collisions
•
External Antennae