Central Powered CDU User Guide PLM # 701-0005-0003 Central Power CDU Version 1.
Central Powered CDU User Guide PLM # 701-0005-0003 Version 1.0 Date 27nd Oct 2009 Table of Contents 1. Specifications ........................................................................................................................... 1 2. Configuration ........................................................................................................................... 3 3. ID Change Procedure: ..............................................................................................
Central Powered CDU User Guide PLM # 701-0005-0003 Version 1.0 Date 27nd Oct 2009 1. Specifications Model CDU GPC (Grey, Power Central Hub) Dimensions 122 (H) x 350 (W) x 43.5 (D) mm Display Resolution 16(H) x 48 (W) = 768 dots Display Color Red, Green and Amber Display Languages Multilingual Counter Number - 122 (H) x 90 (W) mm Display Area LED Display Area 75 (H) x 230 (W) mm Display Type Dot-Matrix - Tri-color LED dot 3.0 mm diameter LED pitch 4.
Luminous Intensity per dot Red 7 mcd (@ IFP=40 mA, duty 1/8) Green 10 mcd Max Cable length for CDU connectivity 28 m from Active HUB Connections RJ 45 Connector Cat5e, 4 pair twisted cable with solid wire conductor of 24 AWG Carrying Data & Power from ACTIVE HUB Data Communication 115k bps Differential RS-485 data signal from ACTIVE HUB Display Addressability Unique ID set through software in the range 1 to 99 Power +12V DC 1.
2. Configuration Total Number of CDU Connect at Hub Wire Length (Meters) CDU Current Text Color Text 7 21 1.038Amp Orange 8888 9 14 0.870Amp Orange 8888 10 7 0.738Amp Orange 8888 16 49 0.338Amp Red 8888 15 28 0.490Amp Green 8888 Note: CDU can connect with maximum wire length of 28 meter. 3. ID Change Procedure: First locate the ID Change Switch as highlight in the above picture & make sure all dip switches should be at OFF Position.
Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
