Installation Manual

ManualsBrandsWaveMark ManualsElectronicsRFID Cabinet

HF3000-Series Installation Manual

Doc. No. Revision

07-0002 Rev.3

Page 1 of 14

trademarks of Cardinal Health. All other marks are the property of their respective owners.

HF3000-Series Installation Manual

Contents

1 Purpose .............................................................................................................................................................................. 2

2 Scope .................................................................................................................................................................................. 2

3 Reference Documents ........................................................................................................................................................ 2

4 Product Specification: ........................................................................................................................................................ 2

5 Responsibility ..................................................................................................................................................................... 3

6 Work Safety ........................................................................................................................................................................ 3

7 Unpacking and Transport ................................................................................................................................................... 4

7.1 Unpacking the HF3000 .................................................................................................................................................. 4

7.2 Cabinet and Shelf Transportation ................................................................................................................................. 5

8 Cabinet and Shelf Installation Process ............................................................................................................................... 7

8.1 Cabinet Installation ....................................................................................................................................................... 7

8.2 Shelf installation ............................................................................................................................................................ 8

8.3 Shelf Removal................................................................................................................................................................ 9

9 Cabinet Wall Securing Process ......................................................................................................................................... 10

9.1 Directions for installing with Screw Inserts................................................................................................................. 10

9.2 Directions for installing with Expanding Inserts. ........................................................................................................ 10

10 Cabinet Servicing Process ................................................................................................................................................ 12

11 Cabinet Cleaning Process ................................................................................................................................................. 12

11.1 Cleaning with a detergent ......................................................................................................................................... 12

11.2 Cleaning with wipes .................................................................................................................................................. 12

12 Appendix .......................................................................................................................................................................... 13

Appendix 1: Notice of FCC Compliance .......................................................................................................................... 13

Appendix 2: Notice of Industrie Canada Compliance ..................................................................................................... 13

13 Revision History ................................................................................................................................................................ 14

Summary of content (14 pages)

PAGE 1
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 1 of 14 HF3000-Series Installation Manual Contents 1 Purpose .............................................................................................................................................................................. 2 2 Scope ..................................................................................................................................................................................
PAGE 2
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 2 of 14 1 PURPOSE This procedure describes the specifications, installation steps, and regulatory information for the HF3000-series SmartCabinet. 2 SCOPE This procedure applies to installation of HF3000-series SmartCabinets 3 REFERENCE DOCUMENTS None 4 PRODUCT SPECIFICATION: Power Brick 100-240 VAC, 1.5A Max, 50-60 Hz, power supply is rated to IEC/EN/UL-62368-1 and IEC/EN/UL-60601-1 (medical grade). Cabinet Power 12.5V DC, 7.
PAGE 3
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.
PAGE 4
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 4 of 14 7 UNPACKING AND TRANSPORT NOTE: Two people are required to move the cabinet from the shipping container to its final location. Cabinet contains sensitive electronic components. Take care in moving the cabinet from the shipping container. 7.1 Unpacking the HF3000 Step 1 Prior to unpacking the cabinets, inspect all packing for shipping damage.
PAGE 5
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 5 of 14 7.2 Cabinet and Shelf Transportation Step 1 Identify cabinet location and locate nearest electrical outlet and network jack. Confirm that the cabinet location is free from airborne corrosive agents, excessive dust or dripping water.
PAGE 6
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 6 of 14 While not necessary, packing foam and bags can be used for added safety during transport. To avoid injury and/or damage to equipment during cabinet transport, follow these safety precautions:  Do not place more than 10 shelves inside a cabinet. Step 4  Do not use the cabinet to transport any other materials (e.g. RFID tags, point of use stations, box readers, etc.
PAGE 7
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 7 of 14 When entering and exiting elevators, the cabinet’s wheels may lodge in the elevator door gap. If this happens, gently move the cabinet from side to side and pull/push to dislodge it. DO NOT USE EXCESSIVE FORCE! CABINET AND SHELF INSTALLATION PROCESS 8.1 Cabinet Installation Step 1 Locate power and network cables shipped with the cabinet and remove all packaging and safety covers.
PAGE 8
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 8 of 14 Step 6 Connect network cable to network port on wall, and connect AC power cord to an electrical outlet on wall. The wall outlet must be easily accessible. NOTE: If the network cable is not long enough, obtain a longer straight-thru network cable (a crossover cable will not work).
PAGE 9
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 9 of 14 Step 4 Insert nearest red cable into the red receptacle on the front-right of each shelf. Repeat steps 3 and 4 for additional shelves. Step 5 Secure all unused network connectors and excess cables are secured in the cable chase. Be sure that cables are not twisted or crossed. Step 6 Replace end covers and secure with the screws. The cabinet is now ready for final configuration.
PAGE 10
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 10 of 14 8 CABINET WALL SECURING PROCESS Safety Warning: The HF3000-series must be secured to a wall to provide stability and prevent personal injury from tipping. Hospital personnel must secure cabinet using appropriate hardware. 9.1 Directions for installing with Screw Inserts. Step 1 Place a mark on the wall 79” from the floor at the point that will be the center of the cabinet. Step 2 Place bottom edge of bracket on the mark.
PAGE 11
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 11 of 14 Step 5 Remove screws from plastic inserts and tap the plastic inserts into drilled hole until the flanges are flush with the wall. Step 6 Place the expanding inserts in the holes. Tighten the screws until the inserts are snug. Remove screws from the inserts. Step 7 Hold the bracket in position and insert screws back into the inserts. Tighten the screws enough to hold the bracket in place until the cabinet is in position.
PAGE 12
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 12 of 14 9 CABINET SERVICING PROCESS The cabinet must be serviced only by trained service personnel. 10 CABINET CLEANING PROCESS 11.1 Cleaning with a detergent Mix a mild detergent solution such as 1:100 dilution of Alconox, Liquinox, or other mild detergent. Isopropyl Alcohol is an acceptable alternative. Quaternary Ammonium (Quat) is also an acceptable alternative.
PAGE 13
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 13 of 14 11 APPENDIX Appendix 1: Notice of FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PAGE 14
Doc. No. Revision HF3000-Series Installation Manual 07-0002 Rev.3 Page 14 of 14 Pour réduire le 14ause14 de brouillage radioélectrique 14ause aux autres utilisateurs, le type d’antenne et son gain doivent être choisis de manière à ce que la puissance rayonnée isotrope équivalente (par exemple) ne soit pas supérieure à celle autorisée pour une communication réussie. 12 REVISION HISTORY Rev. Date 1 12.12.2018 3 1.30.2019 4 2.20.