WaveIP Ltd. WipAir 6000/3000 Installation Guide W i pA i r 6 0 0 0 / 3 0 0 0 Installation and Operation Instructions October 2009 The information contained in this document is of commercial value, proprietary to WaveIP. It is conveyed to the recipient solely for the purpose of evaluation. Reproduction of this document, disclosure of its contents or any other use of the information herein is strictly forbidden unless expressly authorized in writing by WaveIP. WaveIP Ltd.
WaveIP Ltd. WipAir 6000/3000 Installation Guide Notices Radio Frequency Statement WipAir 6000/3000 has been tested and found to comply with part 15 of the FCC rules and EN 301 489-1 rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment notwithstanding use in commercial, business and industrial environments.
WaveIP Ltd. WipAir 6000/3000 Installation Guide Instructions for Disposal of Waste Equipment by Users in the European Union This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
WaveIP Ltd. WipAir 6000/3000 Installation Guide TABLE OF CONTENTS NOTICES ........................................................................................................ 3 1. INTRODUCTION..................................................................................... 7 1.1 APPLICATIONS ...........................................................................................7 1.2 TECHNICAL OVERVIEW .................................................................................8 1.
WaveIP Ltd. WipAir 6000/3000 Installation Guide TABLE OF FIGURES Figure 1-1: WipAir 6000/3000 PTP (blue) and PTMP (red).......................................7 Figure 1-2: WipAir 6000 2x2 dual polarization MIMO ..............................................8 Figure 1-3: Automatic interference sensibility........................................................9 Figure 1-4: Multiple WipAir 6000/3000 MUs on one tower.....................................
WaveIP Ltd. WipAir 6000/3000 Installation Guide 1. Introduction Thank you for purchasing WipAir 6000/3000 point-to-point solution. WipAir 6000/3000 is a carrier grade, the best of its class point-to-point and Point-tomultipoint broadband wireless bridge. WipAir 6000/3000 is the next generation of radio technology with field proven features of WipAirII.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 1.2 Technical overview WipAir 6000/3000 introduces unmatched benchmark of features and built in technological advantages: • Advanced OFDM 2x2 MIMO - Utilizing superior Advanced OFDM 2x2 dual polarization MIMO (Multiple Input Multiple Output), WipAir 6000 provides cutting edge advantages: o Higher capacity and spectral efficiency - 100 Mbps full duplex. 2x2 MIMO transmits 2 streams that double the throughput on same channel bandwidth.
WaveIP Ltd. WipAir 6000/3000 Installation Guide • Output Power - High dynamic range of 40 dB up to 26 dBm. • Versatile radio – increase flexibility and scalability: • o Configurable channel bandwidth (5/10/20/40 MHz) maximizes capacity and availability. o Multiple frequency bands in one radio.
WaveIP Ltd. WipAir 6000/3000 Installation Guide Figure 1-4: Multiple WipAir 6000/3000 MUs on one tower Without time synchronization, one MU will transmit while the other MU receives. The transmittion of the first MU will block the reception of the second MU since they are close to each other (can even occur when the MUs are on different channels).
WaveIP Ltd. • WipAir 6000/3000 Installation Guide Built in redundancy o Power & data redundancy via 2xRJ-45. o 1+1 trunking capability. o Consecutive AP™ - concatenation capability with power redundancy, as shown in figure 7.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 1.3 Element Management System WipAir 6000/3000 is managed in three ways: 1.3.1 NMS As part of a deployment, The Network Management system (ViewAir NMS) provides one point of management for all the links deployed and allows the operator to monitor and control the units: • Managing entire deployment composed of WipAir Radios • Radio link monitoring and configuration. • Easy PTMP configuration – all in one point. • System health in a glance.
WaveIP Ltd. WipAir 6000/3000 Installation Guide Figure 1-9: Link Manager The Link Manager contains a built in: • RF analyzer. • Numerous link indicators and counters. • Traffic generator – throughput test tool.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 1.3.3 Standard Protocols WipAir 6000/3000 supports the following protocols: • WEB (HTTP) – Manage the radio using an Internet browser. • SNMP – Supports v2c with a private MIB, Traps and notifications. • Telnet.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2. Installation 2.1 Packing List When you first open the package, verify that the unit is complete with the following components: 1. Outdoor Unit – WipAir 6000/3000 MU or SU. 2. Indoor PoE Outlet. 3. Indoor Power Supply (AC input). 4. Pole mounting kit (will not be added if advanced mounting kit is provided). 3 1 2 4 Figure 2-1: General System View 2.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2.3 Installation Overview This section provides installation information for WipAir 6000/3000 system. Note: Outdoor units and antennas should be installed ONLY by experienced installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 7) Connect the CAT5 Ethernet cable from the user’s network/PC to the PoE Outlet ‘10/100 B-T’ port. 8) Connect the power supply to the PoE Outlet power port (‘48VDC’). 9) Align the antenna and secure the unit by fastening the mounting screws. 2.3.1 Select the Best Location Select the appropriate locations for the outdoor unit using the following guidelines: • The outdoor unit can be pole or wall mounted.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2.3.2 Mounting Outdoor Unit can be mount on a pole or on a wall. A general description of wall mount is given in Figure 2-3. Figure 2-3: Wall mount description Note: all outdoor units must be installed with a separation distance of at least 2.5 meters from all persons during normal operation. 2.3.3 Antennas 2.3.3.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2.3.3.2 Tx power The outdoor unit transmit power is configurable using the Link Manager. The Link Manager limits the max transmit power according to the antenna gain, the regulation and the frequency band. The installer, if needed, can select a lower power. Regulation of the unit defines the frequency band supported by the units: FCC: 5.8 GHz. ETSI: 5.4 GHz and 5.8 GHz. Non-regulated: 5.x GHz.
WaveIP Ltd. WipAir 6000/3000 Installation Guide In Point-to-Multipoint mode, the Link Manager software will automatically reduce the Tx power according to the antenna gain. For example: • For integrated antenna of 23 dBi, the Max Tx power allowed by the Link Manager is 13 dBm (10 dBm in WipAir 6000) to meet the EIRP limitation of 36 dBm. • For integrated antenna of 28.5 dBi, the Max Tx power allowed by the Link Manager is 7 dBm (4 dBm in WipAir 6000) to meet the EIRP limitation of 36 dBm. 2.3.3.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2.3.4.2 Using the Built in RSSI buzzer WipAir 6000/3000 units have a built in RSSI buzzer that indicates the best mounting location. The buzzer is beeping at four tone levels: • Fast – highest signal obtained so far. • Medium – the current alignment is lower than the highest signal obtained so far. • Slow – the current alignment is much lower than the highest signal obtained so far.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2.3.6 Cables Straight CAT5 Gauge 24-shielded outdoor rated cable must be installed between Outdoor Unit and Indoor Outlet. The cable should be UV resistant, flame retardant, UL listed and contain at least 4 twisted pairs. The outdoor cables scheme is given in Appendix A – Outdoor Cables Scheme. The Indoor PoE Outlet side and Outdoor Unit side are crimped using RJ-45 tool. CAT5 cable must not exceed 300 feet (91 meters).
WaveIP Ltd. WipAir 6000/3000 Installation Guide Figure 2-5: Cable assembly to Outdoor Unit Figure 2-6: Cable insertion to Outdoor Unit. • Fasten the seal bracket (Figure 2-7). • The unused port should be left sealed.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2.3.7 Indoor Outlet Installation The Indoor Outlet is wall mounted. The Indoor Outlet side cables assembled as follows: 1. Crimp the RJ-45 Plugs on cable ends to form the Outdoor Unit cable. 2. Plug the Outdoor Unit cable to the RJ-45 Jack marked “OUTDOOR”. 3. Plug standard CAT5 cable from the PC to the RJ-45 Jack marked “10/100 B-T”. 4. Plug the DC plug from the AC/DC power supply to the DC jack marked “48VDC”.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2.3.8 Grounding 2.3.8.1 Grounding the Outdoor Unit (MU /SU) The outdoor unit shall be connected to a protective earth with not less than 10 AWG conductors having green-yellow insulation. The following figure shows the grounding cable from outdoor unit external screw to adjacent grounding rod. The cable should be long enough to reach from the mounting pole to the grounding rod with 3 to 6 feet extra to allow for strain relief.
WaveIP Ltd. WipAir 6000/3000 Installation Guide FCC Notice This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 2.5 Synchronization WipAir 6000/3000 was designed to work with co-located antennas. That means that two or more units can be mounted close to each other. Time synchronization allows reusing frequencies between co-located links and configured with the Link Manager advanced window. The synchronization signal is generated by an external GPS (1 PPS). To configure time synchronization, set all MUs to synchronization Enable and Slave mode.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 3. WipAir 6000 Technical Specifications 3.1 Radio Radio Frequency 700–900 MHz, 2.3-2.5 GHz, 3.3-3.8 GHz, 4.9 GHz, 5.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 4. WipAir 3000 Technical Specifications 4.1 Radio Radio Frequency 700–900 MHz, 2.3-2.5 GHz, 3.3-3.8 GHz, 4.9 GHz, 5.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 5.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 6. Appendix B – RF Channel Lists 6.1 FCC operating Band: 5725 MHz - 5850 MHz. Channel No.
WaveIP Ltd. WipAir 6000/3000 Installation Guide 7. Appendix C – FCC Approved Antennas Antenna Type Model Flat panel Dish Gain Dimension [dBi] Beam Width SPDB-5159-23V12D 23 10º x 10º 305x305x15 MT-485025/NVH 23 10º x 10º 371x371x40 MT-485025/CVH 23 10º x 10º 371x371x40 DP-5X-285D-005 28.