Installation Instructions

Watch an instructional video at

waterguru.com/water-test

send the data to you.

Rinse the TEST tube with the water that you are sampling.

Fill the TEST tube all the way to the top with the water sample.

For best results don’t leave air trapped in the tube.

Seal the TEST tube tightly to avoid any leaks.

Ship the TEST tube ﬁlled with pool water to WaterGuru, in

the prepaid envelope.

Pool Water Test Instructions

RINSE

FILL

SEAL

SHIP

WaterGuru will notify you

when the results are ready.

WaterGuru SENSE is a Class B Digital Device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. (Class "B" is any digital device that is marketed for use in a residential environment.)

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Want to talk with someone? Give us a call at 1-855-701-3889 Send an email to support@waterguru.com

Changes or modiﬁcations not expressly approved by WaterGuru Inc. could void the user's authority to operate the equipment.