Frontpage_final_DWE_v3_tik Donnerstag, 10.
Features Content More than 140 parameters The PrimeLab 2.0 - Truly different The next generation of Photometers. The PrimeLab 2.0 launched by Water-i.d. . Turbidity (NTU), PTSA, Fluorescein built-in Highly accurate readings on 18 parallel wavelengths, Bluetooth-USB-WiFi-GSM-connections, powerful software and app, synchronized over a cloud-service, large HD touch display and the option to connect test probes are just some features of the new PrimeLab 2.0 which supersedes the well established PrimeLab 1.
18 wavelengths sensor technology 5.5'' Color-HD-Touch Display UV - VIS - IR peaks at: 410nm 435nm 460nm 485nm 510nm 535nm 560nm 585nm 610nm 645nm 680nm 705nm 730nm 760nm 810nm 860nm 900nm 940nm Whilst normal Photometers perform tests on one selected wavelength only, the PrimeLab 2.0 receives data from 18 different wavelengths in parallel with each measurement, covering the key parts of UV and IR section of the Spectrum and the full VIS range. The PrimeLab 2.
PrimeLab 2.0 and probes Connecting PrimeLab 2.0 USB - WiFi - Bluetooth - GSM pH - EC - TDS - ORP - Temp. Over time, water testing became much more than just about testing. Real-time availability of reliable test results plus data management are as important as the test results itself. The PrimeLab 2.0 is the ultimate for connectivity! Bluetooth, WiFi, USB (Type C) and GSM (via USB-modem) are available for multiple options to connect the PrimeLab 2.
LabCOM App - Software - Cloud The most powerful LabCOM app/software/cloud-solution, developed over many years and in use with the PrimeLab 1.0 along with the PoolLab, also connects and runs with the PrimeLab 2.0. The PrimeLab 2.0 along with the LabCOM app and software allows you to create unlimited accounts (water sites or locations) and to enter individual water treatment chemicals, both are synchronized via the LabCOM cloud.
LabCOM Cloud PrimeLab 2.0 Camera In-built Camera With the built-in camera, the PrimeLab 2.0 gives the option to scan barcodes and QR-codes to identify Accounts (water-sites or locations) set up by the user and to identify reagents with barcode / QR-code on the package. The advantages of this options are significant: Scanning the barcode / QR-code of a water site ensures that you always connect the test results obtained to the right Account.
1-hour Legionella sp. Test Flexible Parameter Setup - Fairplay Choose from more than 140 parameter-methods 1-hour Legionella sp. test • Quantitative (60 - 10⁶ cfu) AOAC certified • Detection of viable cells • Patented method The LEGIPID 1-hour Legionella sp. test is one of the more than 140 different parameter-methods on the PrimeLab 2.0 Legionella bacteria, in special Legionella pneumorphila serogroup 1, is a harmful threat with a mortality rate of up to 30%.
Reagents DEVELOPED and PRODUCED Laboratories Waste Water Cooling Towers Potable Water Marine Industry Food processing Water Plants Boiler Water in GERMANY Over almost 2 decades, Water-i.d. developed reagents and Photometer-curves for more than 140 different parameter-methods. Just like the PrimeLab 1.0, the PrimeLab 2.0 offers water testing solutions for many different industries, testing almost every parameter from A for Alkalinity to Z for Zinc.
Laboratories Reagents DEVELOPED and PRODUCED Waste Water Cooling Towers Potable Water Marine Industry Food processing Water Plants Boiler Water in GERMANY 16 Range Iron (MR) 0 - 10 mg/l Iron (MR) Ferrous 0 - 10 mg/l Iron (HR) 0 - 30 mg/l Iron total 0 - 3 mg/l Iron in Oil 50 - 500 mg/l Isothiazolinone 0.0 - 10.0 mg/l Legionella 60 -10⁶ cfu Magnesium 0 - 100 mg/l Manganese VLR 0 - 0.030 mg/l Manganese 0.2 - 5 mg/l Methylethylketoxime 0 - 4.
PrimeLab 2.0 Accessories PL2SP-EleORPkit PrimeLab 2.0 Electrode-Basic-Kit "ORP":grey carrying case with foam insert 1 x "PL2Sp-IH30" ORP-Electrode. Sealed gel electrode for samples with low contamination levels and reasonable ionic strength. BNCconnector, cable length = 1 meter. Measuring range: +/- 1,000mV, resolution: 1mV 1 x "PL2Sp-ElBox" A/D-switch-box with BNC-IN and USB-Type-C-OUT to connect with PrimeLab 2.
Frontpage_final_DWE_v3_tik Donnerstag, 10.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ISED Statement English: This device complies with Part 15 of the FCC Rules [and contains licenseexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Specific Absorption Rate (SAR) information: This Communicator meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. IC RF Exposure Information and Statement the SAR limit of Canada (IC) is 1.
CE Statement This product can be used across EU member states. Manufacturer: Water-i.d. GmbH Specifications Hardware Version: 1.0 Software Version: 1.0 Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect device of adaptor: Model: GPE011G-050200-Z Input: 100-240V~, 50/60Hz, 0.3A Output: DC 5V2A 10.0W MAX Declaration of Conformity Water-i.d.