Quick Start Guide

Quick Start Guide
WatchGuard
®
AP
AP430CR
Pole Mount
Clamps
Wall Mount Screws
ACTIVATE YOUR AP
GO TO:
watchguard.com/activate
MOUNT THE AP
CONNECT THE AP
32
1
WALL MOUNT
Plug one end of the Ethernet cable from your network
into the LAN 1 (PoE+) port on the bottom of the AP.
Make sure the other end of the Ethernet cable is
connected to your network through a hub, switch, or
injector with PoE+ (802.3at) power enabled.
Access Point connected to PoE+ injector
Access Point connected to switch with PoE+ power
POLE MOUNT
PoE+
Ground
Screw
Wall and Pole
Mount Screws
DEG
DIM
REV DESCCRIPTION LOCATION SIGN DATE
A Peter
11-May-21
A0
UNIT SCALE SHEET MODEL No.
AP430CR
MM 0,333 1 of 1 PART NAME
POLE MOUNT
APPROVED CHECKED DESIGNED PART No. REV A
Tony Peace Peter
11-May-21 11-May-21 11-May-21
ANGLE
A B C D
0-5 0.02 0.05 0.10 0 -30 0.1
5-10 0.05 0.10 0.15 31 -60 0.3
10-50 0.10 0.15 0.20 61 -90 0.5
50-100 0.15 0.20 0.25
100- 0.15% 0.20% 0.25%