WatchGuard AP AP225W HW Model: W-118 Quick Start Guide WatchGuard Technologies, Inc.
English 1 ACTIVATE YOUR AP CONTENTS GO TO: watchguard.
2 INSTALL THE MOUNTING BRACKET Wa ount Pole mount Wall Plate 4 No Wall Plate 5
3 CONNECT THE AP REAR PANEL Wa Pole mount ount PASS THROUGH WAN (Uplink) BOTTOM PANEL DC iN 6 PASS LAN3 THROUGH PSE LAN2 LAN1 RESET 7
4 MOUNT THE AP Align grooves and slide AP on to bracket 5 CHECK AP STATUS Power Off: Powered off Green: Operation at full power (PoE+ DC) Flashing: Cannot connect to Wi-Fi Cloud or controller Amber: Operation at reduced power (PoE) Flashing: No IP address received from DHCP Uplink (WAN) Off: No Ethernet link Green: Connected to network 2.
CONFIGURE THE AP NOTICES: All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Please read these instructions carefully before operating the product, and refer to them as needed to ensure the continued safe operation of your product. GO TO: watchguard.com/start For additional information, see the Hardware Guide for this device located on the WatchGuard website: https://www.
* FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The device is for indoor use only. Supported in 2412-2462, 5180~5240, 5260~5320, 5500~5700, 5745~5825MHz and operation in the 2412-2462, 5180~5240, 5260~5320, 5500~5700, 5745~5825MHz band are restricted to indoor usage only.
Brasil ANATEL RoHS Statement Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous Substances (“RoHS directive”‘) that became valid on July 1, 2006. It states that all new electrical and electronic equipment put on the market within the member states must not contain certain hazardous materials.
REACH Certificate of Compliance The new EU chemicals policy REACH (Registration, Evaluation, Authorization and restriction of Chemicals) came into effect on June 1, 2007. REACH is Europe’s new chemicals legislation, which is applicable in all 27 EU Member States as well as the EFTA European Economic Area (EEA).
EN 301 489-1 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements. EN 301 489-17 V3.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems.
WATCHGUARD TECHNICAL SUPPORT 1.877.232.3531 (U.S. and Canada) +1.206.613.0456 (all other countries) www.watchguard.com/support ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104 WEB: www.watchguard.com • U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895 © 2019 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries.