OFFICIAL WARWICK AMP OWNER MANUAL BLUE CAB 15.1 - BLUE CAB 30.1 - BLUE CAB 60.
Congratulations on the purchase of your new Warwick combo. Please read through these instructions before connecting and operating the device. Following the guidelines you will soon will benefit from your new Warwick amplifier. Please keep this instruction booklet handy in case you need to consult it again. Please send the PASSPORT to the address indicated therein. INDEX Protective Circuits 5 Blue Cab 15.1 Blue Cab 30.1 Blue Cab 60.
SAFETY HINTS - Please read these instructions - Please heed all warnings Caution: To reduce the risk of electric shock, do not open the amplifier’s case. Avoid exposure to rain or moisture. No user serviceable parts inside, refer all service to a qualified technician. No vessel filled with liquids, such as vases shall be placed on top of the unit. This symbol, wherever it appears, alerts you to the presence of dangerous non-insulated voltage inside the case.
GENERAL INFORMATION For safe and reliable operation please follow these instructions: • DO NOT open the amplifier case! You might receive an electrical shock. For any repair refer to qualified service personnel. • Avoid dust, excessive moisture, direct sunlight and extremely high or low temperatures. • Safeguard the device from impact. Always place the unit on a stable and horizontal surface. • Do not block any of the ventilation openings.
GETTING STARTED Make sure that the mains lead is connected and all external devices (effects) are properly connected and working. Set the VOLUME control (Blue Cab 15.1, 30.1, 60.1) / MASTER control (Sweet 15.3, 25.2) to zero. Plug your bass guitar into the amplifier's INPUT using a shielded cable. Press the POWER switch to turn the device on. Switch off MUTE - the red LED will turn off. (Sweet 15.3, 25.2) Turn up all volume controls of your bass guitar. Adjust the GAIN control until the clip LED flashes.
INPUT VOLUME BASS MID TREBLE PHONES POWER socket to plug in a bass guitar. control to determine the main volume level. control to boost / cut deep frequencies. control to boost / cut mid frequencies. control to boost / cut high frequencies. socket for connecting headphones (min 200 Ohm). switch for turning the amplifier on and off. REAR PANEL MAINS IN AC EFF. LOOP terminal with integrated fuse compartment for connecting the amplifier to mains. for the insertion of an effects unit. ENGLISH BLUE CAB 15.
ENGLISH BLUE CAB 30.1 FRONT PANEL CONTROLS PASSIVE IN ACTIVE IN VOLUME BASS MID TREBLE LINE OUT PHONES POWER socket to plug in a passive bass guitar. socket to plug in an active bass guitar. control to determine the main volume level. control to boost / cut deep frequencies. control to boost / cut mid frequencies. control to boost / cut high frequencies. socket allows connecting additional power amplifiers, active cabinets or a mixing console. socket for connecting headphones (min 200 Ohm).
PASSIVE IN ACTIVE IN VOLUME BASS MID TREBLE AUX. LEVEL AUX. IN LINE OUT PHONES POWER socket to plug in a passive bass guitar. socket to plug in an active bass guitar. control to determine the main volume level. control to boost / cut deep frequencies. control to boost / cut mid frequencies. control to boost / cut high frequencies. control determines the level of the sound source which is connected to the AUX IN socket.
TECHNICAL DATA BLUE CAB 15.1 BLUE CAB 30.1 BLUE CAB 60.1 INPUT 25 mV act. 25 mV pass. 50 mV act. 25 mV pass.
BLUE CAB 15.
BLUE CAB 30.
BLUE CAB 60.
Please see the new Warwick Bass Forum on www.warwick.de For support information please refer to support@warwick.de Headquarters: Branch China: Branch UK: Branch Switzerland: Branch CZ: Warwick GmbH&Co.Music Equipment KG • Gewerbegebiet Wohlhausen • 08258 Markneukirchen/Germany • E-Mail: info@warwick.de Warwick Music Equipment (Shanghai) Ltd., Co.•Shanghai Waigaoqiao Free Trade Zone • Shanghai 200131/P.R.China • E-Mail: info@warwick.cn Warwick Music Equipment Trading (Manchester UK) Ltd.