Instruction Manual

Gutters

Position sensor within 1/4"(6.4mm) of the gutter

bottom and with mois ture sens ing grid fac ing down-

stream (am bi ent air tem per a ture sen sor facing

upstream). Sen sor may be fas tened to the fascia

using the mount ing clamps and gasketed screws

(not fur nished).

Downspouts

Fold cable back parallel to sensor body

and secure with mounting clamps (or

weatherproof tape). Suspend sensor in

downspout with mois ture sensing grid

facing up (ambient tem per a ture sen sor

facing down).

GIT

–1 GUTTER DEICING SENSOR

ETI P/N 11351

We Manage Heat!

PAGE 1
® We Manage Heat!® Gutters Position sensor within 1/4"(6.4mm) of the gutter bottom and with moisture sensing grid facing downstream (ambient air temperature sensor facing upstream). Sensor may be fastened to the fascia using the mounting clamps and gasketed screws (not furnished). Downspouts Fold cable back parallel to sensor body and secure with mounting clamps (or weatherproof tape). Suspend sensor in downspout with moisture sensing grid facing up (ambient temperature sensor facing down).
PAGE 2
INSTALL IN ACCORDANCE WITH THE REQUIREMENTS OF ALL APPLICABLE ELECTRICAL AND BUILDING CODES AND REGULATIONS. ENSURE THAT ALL CONDUIT/CABLE TERMINATIONS ARE WATERTIGHT. APS–3C/APS–4C If you experience installation problems or have any questions regarding proper installation procedures, ETI service personnel are available for assistance during normal business hours, 8:00 am to 4:00 pm, EST. Phone (800) 234–4239. FAX (574) 233–2152.