(WBT420) User Manual Version 1.4 PALM GARDEN ENTERPRISES CORP. Copyright © 2005.
Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. Federal Communications Commission (FCC) Statement 15.
FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Bluetooth Introduction Bluetooth is a global wireless standard for enabling short-range wireless connections.
Package List The following checked items should be in the package. Items Quantity Transmitter (TX) 1 Audio Cable 1 WANSTONIC Stereo Headset Kit The music source for this headset can be any consumer device such as a Portable MP3 Player, a Mobile Phone, a PC, a Music System, or an In-car Entertainment System that is compliant with the Bluetooth specification version 1.1 or 1.2 and is supporting the Advanced Audio Distribution Profile (A2DP).
DC Power I/P 3.5m/m Phone Jack POWER ON/OFF Figure 3 – Bluetooth TX How to Use WANSTONIC Stereo Headset performs well with the Bluetooth TX and can be used to demonstrate the following usage scenarios: z Enjoying the superior music quality Connect a Bluetooth TX with any audio source with a 3.5ψmm audio jack and play music. Let the music be streamed to the Stereo Headset.
LED indicators Location LED Status HS (Module Side) Status LED lights up Function Pairing mode steady HS (Power Side) Status LED flashes Standby / Linked Charging LED flashes Low battery output slowly Charging LED lights up Charging (Indicator turns off when charging steady is completed.
1. Setting Up Music Source (1) Please make sure you have 3.5ψmm audio jack in your music source, i.e CD Player, a MP3 player or a PC. (2) Link the TX to the audio source with an audio cable. (3) Press the Power Key on TX about 5 seconds until the LED indicator is flashing. Release it and the TX will be turned on. 2.Connecting TX / Headset (1) Turn on the headset. Meanwhile, you can hear the opening sound from the headset. (2) The TX and the headset will be paired automatically after a few seconds.
Specification Product Name BluePacket Bluetooth Transmitter Photo Standard Bluetooth 1.2 compliant Power Class Class 2 Frequency Band 2.402~2.480 GHZ unlicensed ISM band Profile Supported A2DP Profile Audio Format SBC Memory 8M flash external memory Rx Sensitivity < 0.
Dimensions 47.54(L)×47.54mm(W)× 29.52mm(H) Weight About 20 grams FAQ 1. Q : How do I know that the battery of the headset have insufficient power? A : The battery power is almost exhausted when one or more following scenarios happen: (1) The headset starts to reset automatically. (2) You can constantly hear breaks on the audio link, or (3) You cannot connect the headset to the TX after several tries. 2.
A: The volume keys can be adjusted in both music and phone mode. 4. Q : Why do I hear beep from the headset? A: The beep means the headset is in the low power status. The headset will beep every 20 seconds to remind you to charge it. Meanwhile, the charging LED indicator is flashing. 5. Q : How do I know the maximum and minimum volume?A: You can hear beep if you adjust the volume up key to the maximum. If you adjust the volume down key to the minimum, you can also hear beep. 6.