SLU-T1000 SLU-T1000
SLU-T1000 Content 1.Product Specifications .......................................................................................... 2 2.Product Picture ..................................................................................................... 3 3.Warning .................................................................................................................
SLU-T1000 1.Product Specifications Specification Dimension 47.3*23.3*8.5 mm Battery 70mAh Charging Wireless charging IP Grade IP68 Working Temperature: -10~60℃ Working Environment Humidity:10%~90% UWB Specification Frequency Band CH2: 3993.6MHz; CH5: 6489.6MHz Speed 6.8Mbps Transmitting Frequency 2 times per second(Can be modify) Output Power ≤-41.3dBm/MHz Channel Support channel 2&channel 5 Protocol Standard IEEE 802.15.4-2011 UWB RFID Specification Frequency 13.
SLU-T1000 2.Product Picture Product Picture： LED LED status： Charging：Red Full： Green Low light reminder： Red (1 per second Flash) Please Charge our tag on wireless charging when LED flash red. UWB positioning system includes UWB Tag, UWB Anchor and server. The positioning system is based on TDOA work. In TDOA, tags send periodic blink message that are received at the anchor node. Anchors report blink reception time-of-arrival (TDOA) timestamps to the server.
SLU-T1000 This UWB Tag is used for swimming caps in the Swimming Center as indoor use only. Notices: 1. This device (Location tag) is a kind of tag based on UWB technology with high precision location. 2. This Product meets the design requirements on environmental protection, Product storage, use and disposal shall comply with relevant national laws, regulations, requirements. 3. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4.
SLU-T1000 3.Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
