Directions Meanings of icons: Forbidding: forbid improper operations to avoid damaging the Notebook PC. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products.
Content Directions ..............................................................................................................................1 Safety Precautions ...............................................................................................................3 Notice for the USA FCC Part 15 ............................................................................................4 1 Knowing Your Notebook PC .................................................................................
Safety Precautions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. DO NOT press or touch the LCD Screen. DO NOT place the Notebook PC with small items, they may scratch LCD Screen or enter the Notebook PC. DO NOT expose the Notebook PC to dirty or dusty environment. Keep the environment clean and dry. DO NOT place the Notebook PC on uneven or unstable work surface. DO NOT place or drop objects on the top of the Notebook PC. DO NOT shove any foreign objects into the Notebook PC.
Notice for the USA FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. However, there is no guarantee that interference will not occur in a particular installation.
1 Knowing Your Notebook PC 1-1 Top Side 1. Built-in Camera 2. LCD Screen 3. Power button 5. Keyboard 7. active mode. 10. Charge Indicator Light is orange during being WiFi Indicator charged and is green when the Cap Lock Indicator battery is fully charged or Light is green when the cap keypad discharged; light flashes when the is unlocked. 8. HDD Status Indicator Light is green when the HDD is in Microphone 4. 6. 9. battery is weak. Numeric Keypad Indicator 11.
1-2 Right Side 1. SD/MMC Port 2. USB Port (2.0) 3. VGA Port 4. Ethernet/LAN Port 1-3 Left Side 1. Lock Port 2. Power Jack 3. USB Port (2.0) 4. Microphone Jack 5. Headphone Jack The USB card can only be inserted in one orientation. Force to insert the card may in result of damage. 1-4 Bottom Side 1. Lithium Rechargeable Battery 2. Battery Latch 3.
2 Caring the Notebook PC The Notebook PC is a precision device; the error operation may damage the device. 2-1 LCD Screen LCD Screen is the most delicate component of the Notebook PC and comprised of thin glass. It may be broken up by external abrupt force. DO NOT scratch the cover of the Notebook PC, or the scrape on the cover cannot remove. DO NOT cover the LCD Screen strongly, or else damage may occur.
2-3 Keyboard Keyboard is the most often used component by finger directly. Use a little brush to clean or a can of compressed air to remove dust from between the keys on the keyboard. Moisten a soft, lint-free cloth with water or cleaner and wipe the surface of the keys smoothly. If the water seeps into the keyboard, the circuit will not be damaged directly because of the no-power supply keyboard. But the deteriorate of the Printed circuit board will occur and will result in malfunction of the keyboard.
2-7 Other Notes DO NOT expose the Notebook PC in hot environment for a long time, especially in the car. Or the parts of the Notebook PC will be metamorphic. Keep the data for future possible use termly. Renew the hardware or software termly in order to keep the Notebook PC compatible and steady. 3 Traveling with the Notebook PC Turn off the Notebook PC and disconnect all lines before moving it. Following the below steps, if you want to travel with your Notebook PC. Attention 1.
4 Getting Started 4-1 Install the Rechargeable Battery Power the Notebook PC before using it. There are two ways to power the Notebook PC: Use the AC Adapter to power it or use the removable Battery Pack. The Notebook PC is designed to work with a removable Battery Pack. Your Notebook PC may or may not have its Battery Pack installed.
4-3 Connecting the Power Adapter The Notebook PC comes with a universal AC-DC adapter and the allowable input voltage of adapter is from 100V to 240V. Following the below steps to connect the adapter: 1. Take the adapter and the power cord, and then connect the adapter with the power cord. 2. Plug the DC end of adapter into the power jack of the Notebook PC. 3. Insert the AC end to the wall outlet 4. Check the connections above correctly before turning on the Notebook PC.
5 Using Your Notebook PC 5-1 Turning on the Notebook PC 1. Open the LCD screen and adjust the angle of the Notebook PC’s LCD Screen 2. Press the POWER button to turn on the Notebook PC. 5-2 Adjust the Brightness of LCD Screen The Notebook PC uses an active matrix TFT LCD and provides a Display (Monitor) Output Port to connect the external monitor. The Notebook PC supports the function to adjust the LCD Screen through the following composite buttons.
Function Keys These function keys with the color word or icon sign means that their function only can be activated when clicking the function key and the key at the same time. +:Turn on or turn off the camera window. +:Turn on or turn off the WiFi. +:Turn on or turn off the mute. +:Turn down the volume. +:Turn up the volume. +:3G RF Switch(optional). +:Shift between LCD Screen and external monitor.
6 3G Wireless Network The Notebook PC reserves the 3G module port, antenna and USIM card plug that you can install the purchased 3G module, plug the USIM card into the card slot to go online as the following steps. 1. Turn off the Notebook PC, remove all the connect cables, unscrew the screw as below, to open the back shield of the unit. 2. 1) Install 3G module as the following steps: As the Pic1, plug the reserved 3G antenna into the main antenna buckling position on the 3G module.
4. Remove the battery and insert the SIM card into SIM card slot of the unit as right. (Remove the battery as refer to the detailed on P9) Pay attention to the orientation of the USIM card you would insert, referring to the direction as showed on the above. Force to insert the card may in result of damage. Eject the card softly with its electrical contacts towards the bottom of the unit.
7 Upgrading Your Notebook PC 7-1 Connect the External Monitor The Notebook PC supplies a VGA port for connecting External Monitor or projective device. 7-1-1 How to connect the External Monitor 1. Turn off the Notebook PC and insert the 15-pin D-sub monitor plug to the external monitor. 2. Turn on the Notebook PC. +:Shift between LCD Screen and external monitor. 7-1-2 Connect Keyboard and Mouse The Notebook PC’s integrated the keyboard with 84 keys.
7-1-4 Lock Port The Lock Port allows the Notebook PC to be secured using and can prevent the Notebook PC to be removed from a fixed object. 7-2 Enter the BIOS Setup Menu Follow the below steps to enter the BIOS Setup Menu: 1. Click F2 button quickly during loading the system, then the system will enter “Setup Utility” as shown below: 2.
Click F9 button to setup defaults and select “Yes” to confirm. 4. There is no need to change the startup order and click F12 directly to select the temporary startup option after turning on the unit. The BIOS version would be updated occasionally. Once there is difference from the manual, please be subjected to the actual operation.
8 Appendix 8-1 Troubleshooting Q1:How to turn off the Notebook PC when the halted system cannot warm boot? A:Press the POWER button and hold 4 or 6 seconds to turn off the Notebook PC. Q2:How to check the Notebook PC if the Notebook PC cannot be turned off? A:1.If the power is low, connect to the electric outlets. 2.Check that the video display system is not in the external monitor mode. 3.Make sure the indicator of the adapter turns on and the adapter works well. 4.
Q7: If the image isn’t clear A: Check that the lens is clear or not, if not, clean with the soft cloth. Q8: If the mobile moves slowly A: The camera needs some light when gathering the data and the speed will be slow if the light condition isn’t good. Please adjust the screen position of the Notebook PC or the position of the user. The image display also shall be slower by the heavy loading for the system when the many applications are running. Please close the unused procedure.
8-2 Specifications Main Feature CPU Intel Atom N450 CPU Power Consumption 2.5W MAX On-die, primary 32-kB instructions cache and L1 Cache Size 24-kB, write-back data cache L2 Cache Size 512-kB on-die second level cache Memory (#) Max 2GB Memory Type DDRII 667/800 MHz Storage HDD Capacities (#) Max 320GB TFT Screen TFT Screen Size 10” inch Screen Type TFT Description TFT LCD 1024X600 (WSVGA) Built-in Camera Resolution 1.
Sound Card Type HD Codec I/O Device Mouse Touch Pad Keyboard 84-key keyboard Condition Operating Temperature 5-35℃ Operating Humidity 35%-85% Storage Temperature -20-55℃ Storage Humidity 20%-93% Power Adapter AC 100~240V; DC 12V Output Power (maximum) ≤40W Battery (Type) Lithium rechargeable battery Voltage 11.1V Port Standard LAN Type: 10/100Base-T LAN Wireless Card: 802.11 b/g/n Headphone Port, Speaker, Built-in Microphone, Audio Port Microphone Port USB Port USB-A Port(x3),USB2.
3G Module Port(reserved) Support 3G module Physical Features No battery About 1.0Kg With battery About 1.3Kg Weight Dimension 262*178*39mm Design and specifications are subject to change without notice. The # symbol means that the item is optional.