Product Description

ManualsBrandsWallys Communications Technologies ManualsElectronicsDual Band 11AC Wireless Module

Table Of Contents

DR600VX

2x2 MIMO 802.11ac Mini PCIe WiFi Module

Dual Band Wireless Access Points

Features

Qualcomm-Atheros QCA9882 chipset

2.4GHz max 24dBm & 5GHz max 23dBm output

power

IEEE 802.11ac compliant & backward

compatible with 802.11a/b/g/n

2x2 MIMO Technology, up to 867Mbps

Mini PCI Express edge connector

Support the Frequency 2412MHz~2462MHz

Support the Frequency 5180MHz~5825MHz

RoHS compliance ensure a high level protection

of human health and the environment from risks

that can be posed by chemicals

Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check

(LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards

Cards are individually calibrated for Quality Assurance

Applications

Security Surveillance

Commercial radio coverage

Hotel Wireless application

Country coverage

Forest fire protection engineering

Some special scene application

Product Description

DR600VX based on QCA9882 chipset is an enterprise wireless module integrated with 2x2 5G

high power Radio module and 2x2 2.4G high power Radio module designed specifically to

provide users with mobile access to high-bandwidth video streaming, voice, and data

transmission for office and challenging RF environment in factories, warehouses establishment.

http://www.wallystech.com/ 1

Summary of content (14 pages)

PAGE 1
DR600VX 2x2 MIMO 802.11ac Mini PCIe WiFi Module Dual Band Wireless Access Points Features Qualcomm-Atheros QCA9882 chipset 2.4GHz max 24dBm & 5GHz max 23dBm output power IEEE 802.11ac compliant & backward compatible with 802.
PAGE 2
Specifications Symbol Parameter Chipset QCA9882 Host Interface Mini PCI Express 1.1 Standard Antenna Connector 2 x UF.L Frequency Range Operating Voltage 2.4GHz: 2.412GHz to 2.462GHz 5GHz: 5.15GHz to 5.825GHz 3.3V DC Power Consumption Modulation Techniques Environmental Temperature Environmental Humidity, non-condensing OFDM: BPSK, QPSK, DBPSK, DQPSK, 16-QAM, 64-QAM, 256-QAM Operating: -40°C to 70°C, Storage: -40°C to 90°C Operating: 5% to 95%, Storage: Max.
PAGE 3
RF Performance Table Operating Mode Data Rate TX Power Tolerance 1 Chain 2 Chains 1Mbps 20dBm 23dBm ±2dB 2Mbps 20dBm 23dBm ±2dB 5.5Mbps 20dBm 23dBm ±2dB 11Mbps 20dBm 23dBm ±2dB 6Mbps 21dBm 24dBm ±2dB 9Mbps 21dBm 24dBm ±2dB 12Mbps 21dBm 24dBm ±2dB 18Mbps 21dBm 24dBm ±2dB 24Mbps 21dBm 24dBm ±2dB 36Mbps 20dBm 23dBm ±2dB 48Mbps 19dBm 22dBm ±2dB 54Mbps 19dBm 22dBm ±2dB MCS0 21dBm 24dBm ±2dB MCS1 21dBm 24dBm ±2dB MCS2 21dBm 24dBm ±2dB 2.
PAGE 4
Operating Mode Data Rate RX Sensitivity Tolerance 1Mbps -95dBm ±2dB 2Mbps -94dBm ±2dB 5.5Mbps -92dBm ±2dB 11Mbps -90dBm ±2dB 6Mbps -94dBm ±2dB 9Mbps -93dBm ±2dB 12Mbps -92dBm ±2dB 18Mbps -90dBm ±2dB 24Mbps -88dBm ±2dB 36Mbps -85dBm ±2dB 48Mbps -81dBm ±2dB 54Mbps -80dBm ±2dB MCS0 -93dBm ±2dB MCS1 -91dBm ±2dB MCS2 -89dBm ±2dB 2.4 GHz MCS3 ±2dB 802.
PAGE 5
Operating Mode Data Rate TX Power Tolerance 1 Chain 2 Chains 6Mbps 20dBm 23dBm ±2dB 9Mbps 20dBm 23dBm ±2dB 12Mbps 20dBm 23dBm ±2dB 5 GHz 18Mbps 20dBm 23dBm ±2dB 802.
PAGE 6
Operating Mode Data Rate RX Sensitivity Tolerance 6Mbps -94dBm ±2dB 9Mbps -94dBm ±2dB 12Mbps -92dBm ±2dB 5 GHz 18Mbps -90dBm ±2dB 802.
PAGE 7
GPIO Pin Mapping GPIO Pin Function GPIO0 WLAN DIS GPIO1 WLAN LED GPIO2 MCI CLK IN GPIO3 MCI CLK OUT GPIO4 MCI DATA OUT GPIO5 MCI DATA IN GPIO12 TMS 13 TCK 14 TDI 15 TDO 16 CPU WARM RESET / JTEG RESET _ _ _ _ _ 17 GPIO17 BT LED 19 ANT A 20 ANT B 21 FEM BS 22 FEM MODE MiniPCIe Slot Pin Assignment TOP Side Bottom Side 1 PCIE WAKE L 2 VCC 3V3 3 NC 4 GND 5 NC 6 NC 7 PCIE CLKREQ L 8 NC 9 GND 10 NC _ _ 11 PCIE REFCLK N 12 NC 13 PCIE REFCLK P 14
PAGE 8
31 PCIE RX P 32 NC 33 PCIE RX N 34 GND 35 GND 36 NC 37 GND 38 NC 39 VCC 3V3 _ (RESERVED) 40 GND 41 VCC 3V3 _ (RESERVED) 42 NC 43 GND 44 GPIO1 WLAN LED 45 NC 46 GPIO17 BT LED 47 NC 48 NC 49 NC 50 GND 51 NC 52 VCC 3V3 Version Version CPU DR600VX QCA9882 DR600VX-i QCA9890 Operation Temp. Up to 85° DR600VX-4.9 QCA9882 Support 4.
PAGE 9
FCC Regulatory Compliance Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 10
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules FCC Part 15 Subpart C 15.247 & 15.407 2.3 Specific operational use conditions The module is a Wireless module. Frequency Range: 802.11b/g/n-HT20: 2412 ~ 2462MHz 802.11n-HT40: 2422 ~ 2452MHz Channel Number: 802.11b/g/n-HT20: 11 802.11n-HT40:7 Type of Modulation: 802.11b: DSSS 802.11g/n: OFDM Data Rate: 802.11b: 1/2/5.5/11Mbps 802.11g: 6/9/12/18/24/36/48/54Mbps 802.
PAGE 11
the host manufacturer will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. 2.
PAGE 12
2.8 Label and compliance information Host product manufacturers need to provide a physical or e-label stating “Contains FCC ID: 2AG7VDR600VX” with their finished product. 2.
PAGE 13
Federal Communication Commission Statement (FCC, U.S.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 14
Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. http://www.wallystech.