User Manual WalkingPad Walking Device Please read this manual carefully before operating the product and keep it properly. Model No.
User Manual Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Welcome to use 01 Product and Accessories Thank you for choosing WalkingPad Walking Device , hereinafter referred to as a WalkingPad, which posess various advantages including exquisite, simple, innovative integral design. From now on, enjoy the quality life of walking at home. Please carefully check whether the contents of the package are complete and intact. If there is any missing or damaged, please contact the seller.
02 Function schematic diagram 1.
02 Function schematic diagram 3.Walkingpad remote control 2.
03 Guide for initial operation 1.Choose flat ground to place the walkingpad. It is forbidden to place it on a thick and soft cushion. 2. Unfold the walkingpad slowly and press it down to completely flat. 3.Check and adiust the walking belt in the middle position . 4. Connect the power line and turn on the switch. 5.Search "Walkingpad" App from Apple Store or Android Google Play and complete installation. 6. Open the App,follow the prompts to set up the device. 07 7. Enter novice guide. 8.
04 Learn to use WalkingPad 1. Mode instruction 2. Instructions of the standby mode control. 3. Instructions of fixed speed mode control (primary mode) Standby Mode Light of the Standby mode is on; Motor and sensor stop response. Standby Mode Fixed speed mode Light of the fixed speed mode is on; Control the speed through the remote control or APP. The motor and sensor stop responding in this mode to prevent nonusers from accidentally triggering the WalkingPad.
04 Learn to use WalkingPad 4. Description of automatic mode control (advanced mode) Under this automatic mode, set as the intelligent start and stop, the WalkingPad will start automatically to the target speed(default is 1.75 mi/hr) while entering this area. Automatic Mode This mode is advanced mode, which is more difficult and can be used completely without the remote control. It is recommended for users who have good sports coordination or have walking machine experience.
05 Safety Notice Please keep a rear distance of 50cm or more. Please keep a distance of 50cm or more for both sides. 13 Please choose sport shoes. Using on uneven ground is prohibited. Please do not stand up on the walking machine when it is under power on and auto-calibration situation. It is strictly prohibited to walk up and down the walking device when running. Anti-pinch Anti-involved, please do not trample. Folding the machine if not power off is prohibited.
05 Safety Notice 06 Maintenance and servicing 1. Clean the walking machine Unplug the unit from the electrical source before you begin. Pour a little gentle detergent in the cotton rag or towel. Don’t pour the detergent on the belt directly, and don’t use acid or corrosive cleaners. Horizon Wipe down the frame, motor encasement and belt. Don’t wipe backside of the belt. After a period of using, the end part may appear dust and stains, that’s normal situation, and just clean up.
07 Hazardous substances declaration 08 Trademark and Legal Declaration Beijing Kingsmith Technology Co., Ltd has patents of WalkingPad Walking Machine series products.
FCC ID: 2ARDB-WPA1F Manufacturer: Beijing Kingsmith Technology Co.