User Instructions

Flexible Neckband Bluetooth Headset
FEATURES:
- Durable Aluminum Earbuds
- Magnetic Earbuds
- Nylon camo cable: 22.5” length
- Battery Life: 4 hours Bluetooth streaming
- High dynamic range speaker
- Rechargeable battery
- 3 sizes foam ear tips (S/M/L)
- Carrying case
- Micro USB charging cable
Instructions
Proper fit:
When ready to insert into ear. Roll and compress the foam tip between your fingers. Insert into your ear and hold in place for
10-15 seconds to allow the foam to expand and seal within your ear. Properly sealed earbuds will significantly reduce outside
noise muffling the ambient sound. - Be sure to have the product OFF when testing how well the foam tips have been seated
in your ears.
Power On/Off:
Turn the power on/off by holding the Bluetooth multifunction button for 2 seconds.
Volume Control:
Volume can be increased or decreased by pressing the Volume + or Volume button
Charging:
With the unit plugged in the LED will illuminate red while charging. When fully charged the LED will turn blue.
NOTE: When device is in the OFF position, the ear buds will still provide passive NRR.
Pairing the device:
When the unit is first turned ON it will search automatically for the last paired device and then connect, if a device is not found
it will search for a few minutes and if not paired, Bluetooth will automatically enter pairing mode. In Pairing Mode, the light will
flash Blue then Red until paired.
Follow the instructions on the device you would like to pair with to locate and connect to “Walker RPE(Note: Auto re-connects
to previous last connected device during pairing if the BT device has been paired previously). Once paired, the blue LED will be
flashing every few seconds.
Answer Call:
Short press the BT Pairing button to answer incoming call.
Reject Call:
Double press the BT Pairing button to reject the call.
Cancel/end call:
Short press the BT Pairing button to cancel/end call.
Last number redial:
Double press the BT Pairing button to re-dial the last phone number.
Audio Pause/play:
Short press the BT Pairing button to pause/play music.
Skip a song by holding the BT volume up/Down
Bluetooth
Multifunction
Volume +
Volume -
USB Charing Port

Summary of content (3 pages)