Instruction Manual R0
Table of Contents About Your Headset Headset Overview Raptor Use How to Properly Fit the Raptor How to Properly Fit Your Foam Plugs Device Function Connect to Walker’s LINK Walker’s LINK APP Features FCC Compliance Limited Warranty Warranty Registration 3 4 5 6 7 8 9 10 14 15 16 Contact Us WEBSITE www.walkersgameear.com GSM, LLC P.O.
About Your Headset Bone Conducting Technology Unique bone conducting technology further prevents damage to ear drum compared to traditional technologies. Bluetooth Enabled Connect your Raptor headset to your phone to control with ease on our Walker’s LINK app, free on iOS and Android. Sleep Mode Conserve device battery with our automatic device shut off. Extended Battery Life Never cut a session short with over 7 hours of battery life off of a single charge.
Headset Overview LED Status Light Power On/Off Bluetooth Multifunction Micro USB Charging Port Volume Volume Down Up Page 4
Raptor Use The Walkers Raptor can be used two ways. Enhancement Only Worn alone, the Raptor can provide amplified hearing as needed along with the Bluetooth functions. When used this way there is NO NOISE PROTECTION. DO NOT OPERATE THE RAPTOR IN THIS METHOD WHILE USING A FIREARM. Enhancement & Protection To utilize the Raptor as an Enhancement & Protection device you will need to use a set of the included foam plugs or any other form of in the ear hearing protection. Simply fit the plugs as directed.
How to Properly Fit the Raptor Raptor should only be worn after foam plugs have been properly fitted. See page 7 for how to properly fit your plugs. 1. Place Raptor on head so that it wraps over your ears and both pads rest on your temples. Note: Raptor should not sit inside the ear. 2. For best audio quality, both pads should make direct contact with the skin on your temples. Obstruction from hair, glasses, or other headware may reduce sound quality. 3.
How to Properly Fit Your Foam Plugs Your Raptor does not provide hearing protection on its own. Foam plugs must be properly worn to ensure hearing protection from gun shots and other loud noises. Step 1: Compress the foam plug by rolling between your fingers until it becomes malleable. Step 2: Quickly insert the foam plugs into the ear canal as deep as it is comfortable to wear. Step 3: Hold in place for 10 seconds to ensure plug expands and seals in the ear canal.
Device Function Power On Device: Press and hold power button for 2 seconds. Raptor will play an audible “Walker’s” cound clip to indicate the unit has powered on. Ambient Volume Adjust: Volume changes respectively when pressing the Ambient Volume Up or Down controls: • Volume Up increases volume by one stage. • Volume Down decreases volume by one stage. NOTE: When Ambient volume reaches minimum there will be a double beep. When Ambient volume reaches maximum there will be a double beep.
Connect to Walker’s LINK Upon first initial start up the Raptor will enter pairing mode automatically and you will hear an audible “Pairing” clip when the Raptor is ready to be connected to your device. The Raptor will also flash Red and Blue when in Pairing mode. Power On Device: 1 Hold the power button on your Walker’s Raptor for 2 seconds to power on the headset. NOTE: To pair the headset to a new phone, continue holding the power button until you hear an audible “Pairing”.
Walker’s LINK APP Features Download our free Walker’s LINK app available on the Apple App Store & Google Play. Volume Adjust: Use the main slider on the app to increase or decrease the ambient volume of your headset. Sleep Mode: To conserve battery life when the earbuds are not in use, the earbuds can be configured to power off after a set time. The earbuds will power off when no button has been pressed for the designated time AND when they are not connected to a device via Bluetooth.
Bluetooth Settings Pairing the device: • When Raptor is first turned ON it will search automatically for the last paired device and then connect. If Raptor has never been paired, it will automatically enter pairing mode. Refer to page 9 for pairing instructions. • In Pairing Mode, the light will flash Blue then Red until paired.
Walker’s LINK APP Features (cont.
NRR Information NOTE: This product is NOT hearing protection and must be used with NRR rated in ear canal, ear buds. Although hearing protectors can be recommended for protection against the harmful effects of impulsive noise, the Noise Reduction Rating (NRR) is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulsive noise such as gunfire.
FCC Compliance GSM, LLC GWP-BCON FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) this device may not cause harmful interference, and (2) this devmice must accept any interference received, including interference that may cause undesired operation.
Limited Warranty Walker’s warranties this product to the original purchaser to be free from defects in materials and workmanship, under normal use and conditions for a period of one year parts from the date of purchase. Under this warranty, this device will be replaced or repaired at our option. Copy of the original receipt or gift receipt, is required for any warranty service.
Warranty Registration Model: Date of Purchase: Purchased From: City: State: Zip: Primary Use: Your Name: Address: City: Email Address: State: Zip: Serial #: ©2018 Google LLC, used with permission. Google and the Google logo are registered trademarks of Google LLC. Apple and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
