INSTALLATION MANUAL support@walielectric.
Supplied Parts List Ceiling Mount Pole A(x1) VESA Plate E(x1) Allen Key J(x1) M8x20 Bolt M-D(x4) Concrete Anchor W-B(x4) Adapter K(x4) Extension Pole B(x1) M8x60 Bolt F(x6) Marking Center Finder K(x1) D5 Washer M-E(x4) Monitor Mount Pole D(x1) Extension Pole C(x2) M8x55 Bolt G(x2) Nut H(x8) Wrench I(x1) M4x14 Bolt M-A(x4) M5x14 Bolt M-B(x4) M6x14 Bolt M-C(x4) D8 Washer M-F(x4) Spacer M-G(x8) Bolt W-A(x4) Washer W-C(x4) Bolt L(x4) Nut M(x4) M6x30 Bolt M-A(x4) 3 M8x30 Bolt M-B(x4)
Step 1 Option A Wood Joist Ceiling If you install this product on wood stud wall, mark the position with provided Marking Center Finder K and pencil on the wall.Drill 3/16"(4.5mm) diameter x 2.2"(55mm) length hole at the marked position, attach the Ceiling Mount Pole A to wall and tighten using 4pcs Bolt W-A & Washer W-C with provided Wrench I . Use both Allen Key J and Wrench I to tighten for stability after pole angle adjusting finished.
Step 1 Option B Concrete Ceiling If you install this product on concrete wall,mark the position with provided Marking Center Finder K and pencil on the wall.Drill 1/2"(12mm) diameter x 1.8"(45mm) length hole at the marked position,attach the Ceiling Mount Pole A to wall and tighten using 4pcs Concrete Anchor W-B with provided Wrench I . Use both Allen Key J and Wrench I to tighten for stability after pole angle adjusting finished.
Step 2 Guide the cable through the opening cable slot on Ceiling Mount Pole A , attach the Extension Pole B ,2 pcs Extension Pole C and Extension Pole D one by one and tighten using 6pcs M8x60 Bolt F & Nut H on the top three joint connection with provided Allen Key J and Wrench I as image shown, tighten the bottom joint connection using 2pcs M8x55 Bolt G & Nut H .
Step 3 Step 3.1 Step 3.2a Select M4x14 Bolt M-A or M5x14 Bolt M-B according to your TV/Monitor,bolt VESA Plate E together with D5 Washer M-E into the mouting holes on the back of TV/Monitor, tighten with screwdriver; If select M6x14 Bolt M-C or M8x20 Bolt M-D according to your TV/Monitor, bolt VESA Plate E together with D8 Washer M-F into the mounting holes on the back of TV/Monitor, tighten with screwdriver.
Step 3 Step 3.2b Bolt VESA Plate E using M8x20 Bolt M-D , D8 Washer M-F together with Spacer M-G into the mounting holes on the back of TV/Monitor with screwdriver to tighten. (Screwdriver needed but not included) M-D M-D M-F M-F E M-G M-G M-G Step 3.2c Bolt Adapter K onto the VESA Plate E using Bolt L and Nut M with provided Wrench I or screwdriver to tighten.
Step 3 Step 3.2c Four bolt methods available for multiple TV/Monitor specification.
Step 5 Hang the assembled TV/Monitor onto the assembled Monitor Mount Pole D , twist clockwise to tighten the three nuts on the VESA Plate E for stability as image shown.
Step 6 Use provided Allen Key J to loosen the nut on the back of Monitor Mount Pole D as image shown to left/right swivel 360° of the TV/Monitor; Use provided Wrench I to loosen the bottom nut on the side of Monitor Mount Pole D as image shown to tilt down 25°; Use provided Wrench I to loosen the three nuts on the VESA Plate E to rotate +3°/-3°.
We support the technology that brings your home to life. We offer high quality products, professional customer service, and extensive technical support. If you have any questions,please contact us. 1-844-SATTLER (18447288537) support@walielectric.