INSTALLATION MANUAL 1343LK support@walielectric.
Supplied Parts List Arm A(x1) VESA Plate B(x1) Décor Cover C(x2) Adapter D(x2) Adapter E(x2) Bolt F(x8) Nut G(x8) Bubble Level H(x1) Allen Key I(x1) M4x14 Bolt M-A(x4) M5x14 Bolt M-B(x4) M6x14 Bolt M-C(x4) M8x20 Bolt M-D(x4) D5 Washer M-E(x4) D8 Washer M-F(x4) Spacer M-G(x8) Bolt W-A(x2) Concrete Anchor W-B(x2) 3
Step 1 Twist the knob to unlock the top arm as shown in image(#1), open the top arm as shown in image(#2) and twist to open up the knob and washer(#3). A Step 2 Option A Wood Stud If installing this product on wood stud, mark the position with Bubble Level H & pencil on the wall. Drill 3/16"(4.5mm) diameter x 2.2"(55mm) length holes at the marked position, attach the mount to wood stud and tighten using Bolt W-A with screwdriver. Fix Décor Cover C onto the front of mount part.
Step 2 Option B Concrete Wall If installing this product on concrete wall, mark the position with Bubble Level H & pencil on the concrete wall. Drill 3/8"(10mm) diameter x 2.4"(60mm) length holes at the marked position, attach the mount to concrete wall and tighten using Bolt W-A & Concrete Anchor W-B with screwdriver.Fix Décor Cover C onto the front of mount part. (Screwdriver not included) 60 H C W-B Step 3 Twist the knob on the VESA Plate B to open the arm and ensure the arm is vertical.
Step 4 Step 4.1 Step 4.2 Select TV Screws Select Spacers ( if needed ) Only one screw size fits your TV M4 M5 M6 M8 Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4,M5,M6 or M8) to use. Step 4.3a Select M4x14 Bolt M-A or M5x14 Bolt M-B according to your TV/Monitor specification,connect VESA Plate B together with D5 Washer M-E into the mounting holes on the back of TV/Monitor, tighten with screwdriver.
Step 4 Step 4.3b Select M4x14 Bolt M-A or M5x14 Bolt M-B according to your TV/Monitor specification, connect VESA Plate B together with D5 Washer M-E and Spacer M-G into the mounting holes on the back of TV/Monitor, tighten with screwdriver.(Screwdriver not included) M-G B M-E M-A M-B Step 4.3c Select the VESA size according to TV/Monitors specification as shown in image, connect the Adapter D & Adapter E to VESA Plate B using Bolt F ,Nut G to tighten with wrench and screwdriver.
Step 4 Step 4.3c Three options available for multiple TV/Monitor specification.
Step 6 Place the assembled TV/Monitors onto the Arm A , twist the knob as shown in image (#1) to tighten the VESA Plate B . Twist the bottom 2 knobs as shown in image (#2) to tighten the whole arm.
Step 7 To ensure the integral stability of the mount, fully tighten knobs using Allen Key I each time after adjusting preferred angle and extension. (Do NOT tighten knobs only by hand alone).Guide the cable through the clip holder on the arm as shown in image (#2).
Step 8 Angle Adjustments.
We support the technology that brings your home to life. We offer high quality products, professional customer service, and extensive technical support. If you have any questions,please contact us. 1-844-SATTLER (18447288537) support@walielectric.