Spec Sheet

MODEL M1
WAITES HARDWARE
SPEC SHEET
Full-service, easy-to-install condition
monitoring in a compact package.
Combined with our powerful, cloud-based, full- or self-service
Waites diagnostics service, this high-frequency, high-G, 3-axis
wireless vibration sensor will keep your equipment running
properly and alert you long before unexpected failures occur.
With over one hundred thousand sensors installed and
monitored, Waites has saved its customers over $50M in
documented lost production (and/or increased production
capacity) in less than under 2 years.
POWER
Battery: (1) 3V Panasonic CR123A Industrial Lithium
Expected Battery Life: 6 years*
*based on reading intervals of Temperature every 15 minutes, RMS every 1 hour,
Raw readings every 24 hours
WIRELESS RADIO
802.15.4 Wireless 2.4GHz ISM Band with 3,000 ft LOS range
TEMPERATURE SENSOR
Range: -40°C to 150°C w/ .5°C Resolution
ENVIRONMENTAL
C1D1 Certified hazardous locations (Coming 11/1/2019)
Operating Temperature -40°C to 85°C
ACCELEROMETER
M001: Tri-Axis, High Dynamic Range
X Axis: +/- 50g Fs = 22,400Hz, 8192 Lines of resolution
Y Axis +/- 16g, Fs = 5400Hz, 8192 Lines of resolution
Z Axis +/- 16g, Fs = 5400Hz, 8192 Lines of resolution
PHYSICAL DIMENSION
2½” x 1¼” ø / 63mm x 32mm ø
1/4-28 mounting hole
With its compact size, the M1 can fit
into practically any space, allowing your
operation to monitor machines in even
the tightest locations.
FREQUENCY RESPONSE
0
-2
2
4
6
AMPLITUDE
FREQUENCY (Hz)
10 100 1K 10K0
X Axis Y Axis Z Axis
WIRELESS VIBRATION SENSOR
FCC ID: 2AUGB-N001
IC ID: 25402-N001