User's Manual

ManualsBrandsWahoo Fitness ManualsBike ComputersWahoo GPS Bike Computer

ELEMNT BOLT GPS Bike Computer

The ELEMNT BOLT is the newest installation in the range of bike computers offered by Wahoo Fitness,

giving you plenty of functionality plus enabling you to measure your performance with ease. The feature

filled ELEMNT BOLT is the new, even more streamlined wireless bike computer in the series, enabling you

to do all the things you expect from a bike computer plus more.

The ELEMNT BOLT Bike Computer is designed to be used in conjunction with the ELEMNT companion

app, a free app which allows you to maximize the potential of the ELEMNT BOLT and makes getting the

most out of your workout an easier task.

As a stand alone device, the ELEMNT BOLT gathers information on temperature, elevation, location &

speed. By adding in additional sensors, the ELEMNT BOLT can gather a wealth of information to expand

your reporting ability on your workout.

Use with or without your smartphone when performing a workout and enjoy quick and easy automated up-

load of your rides when connected to wifi.

iOS: This product is designed for use on the iPhone 4s and newer, iPad 3rd gen

and newer, iPad mini, iPad Air, and iPod 5th gen and newer.

Android: This product is designed for use with Android devices compliant with the

Bluetooth 4.0 protocol running version 4.3 or newer & must allow Third

Party App Access to the Bluetooth 4.0 (Smart) Radio.

NOTE: Wahoo Fitness has not tested complete compatibility with all Android devices matching this

description. Please download the app from the Google Play Store to ensure that it installs on your

device before purchasing a product.

This product is shipped with the following:

• ELEMNT BOLT bike computer

•

Standard Micro USB

• 2 x bike mounts (Stem & Aero Out-Front)

• Quickstart guide

• Important Product Info Guide

Setting Up:

This setup guide is intended to assist with readying your ELEMNT BOLT for first use and pairing

to the ELEMNT companion app.

ELEMNT BOLT Bike Computer:

1. Remove from packaging.

2. Turn on by pressing the power button located on the left side of the device. After first time load-

ing, a QR code will be displayed. You are now ready to start setting up the ELEMNT BOLT

with the ELEMNT companion app on your smartphone.

NOTE: Although the ELEMNT BOLT ships with approximately 50% charge, for best results, it is

recommended that the device be charged fully before performing your first workout.

PAIRING THE ELEMNT TO YOUR SMARTPHONE:

Summary of content (15 pages)

PAGE 1
ELEMNT BOLT GPS Bike Computer The ELEMNT BOLT is the newest installation in the range of bike computers offered by Wahoo Fitness, giving you plenty of functionality plus enabling you to measure your performance with ease. The feature filled ELEMNT BOLT is the new, even more streamlined wireless bike computer in the series, enabling you to do all the things you expect from a bike computer plus more.
PAGE 2
iOS USERS: 1. Download the ELEMNT companion app from the App Store. 2. Open the ELEMNT companion app & watch the introductory welcome video or skip to continue. Make sure you have bluetooth enabled on your mobile device. 3. Select Start to proceed with pairing the companion app to your ELEMNT BOLT. 4. If not turned on already, turn your ELEMNT BOLT on by pressing the button located on the left hand side of the device. 5.
PAGE 3
9. Complete a basic profile to be used with the ELEMNT BOLT. This information will be used to calculate metrics such as calories and HR zones. Alternatively, select Next and add these later. 10. Enable Live Track if desired to allow you to see other riders on the ELEMNT BOLT and allows other ELEMNT users to see you. Additionally, you can also share a link with family and friends to view your location online. 11. If you choose to enable Live Track, you can also automatically share your location with others.
PAGE 4
1. Align the ELEMNT BOLT mount connector (on the back of the ELEMNT BOLT) with the bike mount. The ELEMNT BOLT should be perpendicular to the bike mount, with the Wahoo logo on the ELEMNT BOLT facing away from you. 2. Insert the ELEMNT BOLT mount connector into the bike mount. 3. Twist one quarter turn clockwise to secure. TO REMOVE THE ELEMNT BOLT FROM THE BIKE MOUNT: 1. To remove, grip the ELEMNT BOLT securely and twist one quarter turn anticlockwise. 2. Lift the ELEMNT BOLT out of the bike mount.
PAGE 5
Forget Phone: Use this function to forget the current pairing and display a QR code to enable phone pairing again. System Info: Displays ELEMNT BOLT ID, version and performs advanced functions such as manual update, enable factory reset or run setup: Version: Displays current version and enables manual update over wifi. Factory Reset: Restores settings to factory default. Warning: Will delete all workouts stored on the device. Run Setup: Enables selection of language, units, timezone, time & date.
PAGE 6
• For PC users: Plug in your ELEMNT BOLT to your PC via the Micro USB and the internal memory will function just like a flash drive. NOTE: European Windows 10 requires a patch: https://www.microsoft.com/en-us/download/details.aspx?id=19153 • For Mac Users: An additional application is required to function as an interface - contact support@wahoofitness.com for more information. Updating your Device: App & firmware updates will be installed automatically when a wifi signal is present.
PAGE 7
your sensor & opening the Settings menu to access the Add a Sensor function. Place the sensor close to the ELEMNT BOLT and you will be prompted to save after a few seconds. If you have many close sensors then you will see a More option (bottom right button). If you start your workout without waking up your additional paired sensors, you can still wake them and they will begin to send data. Additionally, you can pair a new sensor at any time, even during a workout.
PAGE 8
In Indoor mode: GPS and elevation is disabled, as these functions are not required for indoor training. Use the Routes function to easily select a route for use on the road, or for indoor training as per your workout needs: • Search for Location: Got somewhere you want to go, but no planned route? Use this feature to enable the Take Me Anywhere function, which will plan your route accordingly from A to B and send it to the ELEMNT BOLT. To make a new route: 1.
PAGE 9
page on the ELEMNT BOLT, and within the Ride page on the companion app while the ride is in progress. A basic summary will be displayed in the companion app in addition to the ride navigation. Additionally, you can modify your route at any time by selecting the route name at the top of the page to either clear the route, or change to an alternative route.
PAGE 10
• • • Customize Pages Set Up Sensors LEDs & Sound Customize Pages: Using the ELEMNT companion app, you can reconfigure the existing workout pages or configure up to 5 personalized workout pages to be displayed on your ELEMNT BOLT. To customize your ELEMNT BOLT display: 1. 2. 3. 4. Ensure the ELEMNT BOLT is powered on and nearby. Open the Settings menu in the companion app. In the Sensors & Data menu, open the customize pages tab. Toggle each desired workout page on or off for display on the ELEMNT BOLT.
PAGE 11
NOTE: The default workout pages cannot be deleted. To restore workout pages to default: 1. Select Reset Pages. 2. Select Reset when prompted to return all pages to the default setting. Set Up Sensors Use sensors with the ELEMNT BOLT to collect & display more data during your workout. If you have additional sensors like a power meter or heart rate monitor, you can add a new sensor from the Settings menu on the companion app or on the ELEMNT BOLT itself. TO ADD A NEW SENSOR: 1.
PAGE 12
• Auto Pause: Set as On for default, the Auto Pause function is used to prevent workout data from being recorded during periods of inactivity. Workout recording will resume automatically with detectable activity. Turn this function Off if all information, including inactivity, is to be recorded. • Auto Lap: Set as Off for default, the Auto Lap function can be set to a given distance or time depending on your preferences.
PAGE 13
1. On the ELEMNT BOLT, open the Settings menu and select Forget Phone. This will forget the phone and cause the ELEMNT BOLT to reboot and return to the default workout screen. (If you have the companion app open, you may notice during this time that the ELEMNT companion app will say that it is searching.) 2. Open the ELEMNT BOLT Settings menu and select Pair Phone. A QR code will be displayed. 3.
PAGE 14
During your Workout: The ELEMNT BOLT will record temperature, elevation, speed & location plus any additional information as per your paired sensors. Any cessation of activity will result in the Autopause function temporarily suspending data recording until activity resumes. During the workout, there are several functions available: • Press the Lap button to start a new lap (can be automated on the Companion app determined by time or distance as per your preferences).
PAGE 15
Resetting the device: Sometimes, your device may require a reset. If not auto-prompted by the ELEMNT BOLT, you can perform one manually by doing either of the following: • • Forced Reboot: Hold down the power button for 10 seconds to perform a forced reboot. e.g. Generally used if the screen becomes non-responsive. Factory Reset: Accessible from the Settings menu, restores settings to factory default. Warning: Will delete all workouts stored on the device.