Retrofit Module Installation and Programming guide Version 0.1 January 29, 2016 Wahoo Fitness 90 W. Wieuca Road N.E.
GEM Retro Module Installation and Programming guide Version 0.1 Email: support@wahoofitness.com www.wahoofitness.com © Wahoo Fitness LLC 2015 Revision History Version Revision Date Change History 0.1 January 29, 2016 Initial Draft 0.2 0.3 0.4 0.5 0.6 Wahoo Fitness 90 West Wieuca Road, Suite 110 Atlanta, GA 30342 www.wahoofitness.
GEM Retro Module Installation and Programming guide Version 0.1 Table of Contents Component identification Introduction Components Installation Programming Wahoo Fitness 90 West Wieuca Road, Suite 110 Atlanta, GA 30342 www.wahoofitness.
GEM Retro Module Installation and Programming guide Version 0.1 Component identification Name Base label QR code label RunFit app Component Name Retrofit module Wahoo Fitness 90 West Wieuca Road, Suite 110 Atlanta, GA 30342 www.wahoofitness.
GEM Retro Module Installation and Programming guide Version 0.1 Component Introduction The Wahoo retrofit module connects to fitness equipment that has a CSAFE port to enable Bluetooth and ANT+ wireless connectivity. Users are enabled to connect or pair their mobile device or leaderboard system via Bluetooth (or ANT+) with the fitness equipment to track workout data and control the equipment.
GEM Retro Module Installation and Programming guide Version 0.1 4. Base label 5. QR code label Not included: 1. Rubbing alcohol or cleaning chemical 2. Paper towel or drying cloth 3. iPhone 4 or later model To download: 1. RunFit app (download from app store) 2. Retrofit Utility app (download from …) Installation 1.
GEM Retro Module Installation and Programming guide Version 0.1 7. Attach the double-sided tape to the bottom of retrofit module and attach to desired area on fitness equipment 8. Clean the side of the base label containing instructions with a paper towel or drying cloth 9. Attach a QR code label to a base label and affix to the area marked as: “ATTACH QR CODE HERE” 10. Clean the fitness console with rubbing alcohol or cleaning chemical 11.
GEM Retro Module Installation and Programming guide Version 0.1 2. Download RunFit app…. 3. Power up the fitness equipment and ensure the green LED on retrofit module is on NOTE: Only power up ONE fitness equipment machine at a time to avoid programming errors 4. Open programming app 5. Choose a 4 character Bluetooth advertising ID 6.
GEM Retro Module Installation and Programming guide Version 0.1 12. Align QR reader with newly programmed QR code 13. Verify that RunFit has paired with fitness equipment 14. Wahoo Fitness 90 West Wieuca Road, Suite 110 Atlanta, GA 30342 www.wahoofitness.
GEM Retro Module Installation and Programming guide Version 0.1 FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
GEM Retro Module Installation and Programming guide Version 0.1 - English: " This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." - French:" Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.