User's Manual

Provide Protection, Bluetooth Keyboard, and integrated Stand for tablet device

Storage and Protection

It attaches to the front of the tablet device by inserting the tablet face first into the opening of the

tray. The tablet device is safely held into position, and protected, by using a shock absorbing,

friction fitting around the inside edges of the product.

Use To utilize the stand and keyboard function of the product, you remove the tablet device by

gently prying the tablet out of the case. You then lift up the hinge and lock it in place by

choosing your desired angle and sliding the tabs down into the proper slots and pushing back to

lock hinge in place. Then, simply place tablet device (either in portrait or landscape mode) into

the opening, running from end to end, and rest it against the raised hinge.

Bluetooth Keyboard Pairing

To utilize the Bluetooth keyboard, you must pair it to the tablet. We will demonstrate this

process using an iPad, however, it will be similar for all tablet devices. The pairing process is as

follows:

1. On the tablet, click on Settings icon on desktop

2. On tablet, Click General

3. On tablet, Click Bluetooth

4. On the product, slide the power button to on

5. On product, Click on pair

6. The tablet will display a code

7. Type the code on the keyboard and press enter

8. Your product is now paired to your tablet device

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

FCC ID: YW2-LEACSIPAD2

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

PAGE 1
Provide Protection, Bluetooth Keyboard, and integrated Stand for tablet device Storage and Protection It attaches to the front of the tablet device by inserting the tablet face first into the opening of the tray. The tablet device is safely held into position, and protected, by using a shock absorbing, friction fitting around the inside edges of the product. Use To utilize the stand and keyboard function of the product, you remove the tablet device by gently prying the tablet out of the case.
PAGE 2
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.