User's Manual

MAKING THE MOST
SEPARATING
1: PLACE THE ZAGGmate™ VERTICALLY ON A NON-SLIP SURFACE.
2: USING TWO HANDS, PLACE ONE HAND ON EACH SIDE OF THE
ZAGGmate, WITH THUMBS SITUATED JUST ABOVE THE 30-PIN
CHARGING PORT, OR THE SIDE WITH KEYBOARD CUTOUT.
3: SECURE THE ZAGGmate WITH ONE THUMB AND THE iPAD®
WITH YOUR OTHER THUMB. APPLY SLIGHT DOWNWARD
PRESSURE TO iPAD AND SEPARATE.
30-PIN
CHARGING PORT
KEYBOARD
CUTOUT
POSITIONING
1
1: LIFT HINGE AND LOCK INTO PLACE
BY SLIDING TAB BACK INTO LOCKING
SLOTS AND APPLYING SLIGHT
PRESSURE.
2: PLACE iPAD (EITHER IN PORTRAIT
OR LANDSCAPE MODE)
INTO CENTRAL GROOVE, AND
REST AGAINST RAISED HINGE.
CENTRAL GROOVE
RAISED
HINGE
BATTERY
ZAGGmate’s LONG-LIFE BATTERY CAN STAY CHARGED
FOR A COUPLE OF MONTHS IN STANDBY.
WHEN NOT IN USE, TURN OFF THE KEYBOARD TO
LENGTHEN BATTERY LIFE.
ZAGGmate WILL GO INTO SLEEP MODE IF LEFT ON AND
NOT BEING USED; PRESS A KEY AND WAIT A SECOND
OR TWO TO BRING IT OUT OF SLEEP MODE.
PLEASE NOTE: ZAGGmate IS MADE FROM AIRCRAFT
ALUMINUM WITH A HIGH-GRADE FINISH SIMILAR TO THE
FINISH ON MANY POPULAR DEVICES.
OPTIONAL: A SET OF FOUR RUBBER FEET IS INCLUDED
THAT CAN BE PLACED ON EACH CORNER TO HELP
PREVENT SCRATCHING ZAGGmate’s HIGH-GRADE FINISH.
FOR UNPARALLELED SCRATCH PROTECTION,
WE RECOMMEND ZAGG'S invisibleSHIELD® OR ZAGGskins™.
THE iPAD’S PERFECT COMPANION
w w w . Z A G G . c o m
©2005 - 2010 ZAGG Inc. All Rights Reserved.
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
iPad® and Apple® are registered trademarks of Apple, Inc.
ZAGG, invisibleSHIELD, invisibleSHIELD with design, and ZAGGmate,
are trademarks or registered trademarks of ZAGG Inc.
OF YOUR NEW COMPANION
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1: This device may not cause harmful interference, and
2: this device must accept any interference received, including
interference that may cause undesired operation