Data Sheet

Data sheet | Item number:857-810
Temperature signal conditioner for thermocouples; Current and voltage
output signal; Configuration via DIP switch; Supply voltage: 24 VDC; 6 mm
module width
www.wago.com/857-810
06.12.2018Page /1 13
Color:
Item description
Short description:
This temperature signal conditioner records signals from type J and K thermocouples and converts the temperature signal into a standard analog
signal on the output side.
Features:
For type J and K thermocouples
Cold junction compensation (on/off)
Switching between measurement ranges is calibrated
Detect sensor's wire break
Detect measurement range underflow/measurement range overflow
Integrate a switchable clipping function to limit the standard analog signal to the upper range values

Summary of content (13 pages)