Datasheet

1
58
JUMPFLEX
®
Relay Socket with Solid State Relay
Solid state relay
Input: 24 V DC
Output: 0 V ... 24 V DC / 2 A
Solid state relay
Input: 115 V AC/DC
Output: 0 V ... 24 V DC / 2 A
Derating for 857-724S
Description
Item No.
Pack.
Unit
Item No.
Pack.
Unit
JUMPFLEX
®
relay socket with solid state relay,
for DIN 35 rail
857-724 1 857-727 1
Technical Data
Accessories see pages 69 ... 71 Accessories see pages 69 ... 71
Control circuit:
Nominal input voltage (V
N
) 24VDC 115V AC/DC
Input voltage range (low level) 0 - 10V 0 - 25V
Input voltage range (high level) 18.8 ... 31.2 VDC 90 - 138V
Nominal input current (I
N
) 9.2 mA 3.9 mA
Load circuit:
Switching voltage 0 V ... 24 V DC 0 V ... 24 V DC
Peak reverse voltage 33 V 33 V
Max. switching current 2ADC 2ADC
Forward voltage at max. switching current < 120mV DC < 120mV DC
Switch on/switch off time 0.1ms / 2ms 5ms / 14ms
Ambient operating temperature -20 °C ... +70 °C -20 °C ... +60 °C
Storage temperature -40 °C ... +70 °C -40 °C ... +70 °C
Dielectric strength control/switching circuit 2.5 kV 2.5 kV
Dimensions (mm) W x H x L 6 x 81 x 94 6 x 81 x 94
Height from upper-edge of DIN 35 rail Height from upper-edge of DIN 35 rail
Wire connection CAGE CLAMP
®
S CAGE CLAMP
®
S
Cross sections 0.34 mm² ... 2.5 mm² / AWG 22 ... 14 0.34 mm² ... 2.5 mm² / AWG 22 ... 14
Stripped lengths 9 ... 10 mm / 0.37 in 9 ... 10 mm / 0.37 in
Standards/Specifications EN 61000-6-4
In order to meet the interference immunity regarding
EN 61000-4-4 and EN 61000-4-5, a shielded cable must
be used on the load side. If a shielded cable is not used,
the 859-890 Overvoltage Protection Module must be used
on the output side.
EN 61000-6-4, EN 60664-1
The operator has to take appropriate measures so as to
meet the requirements of immunity to interference for
electrical and electronic devices (acc. to EN 61000-6-2).
Approvals 1, g, UL 508 1, UL 508
2
1
0 50 70 ϑ (°C)
I (A)
4030
at V
N
at V
N max
Ambient operating temperature
Continuous current
0.5
1.5
2.5
13
14
N.C.
+
R
L
A2
A1
13
14
+
R
L
N.C.
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 01.07.2013
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Tel.: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com