Datasheet

852-111
Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •D-32385 Minden Tel.: [phone] E-Mail: [e-mail]
21.08.2009 Hansastr. 27 •D-32423 Minden Fax: [phone] www.wago.com
5-Port 100BASE-TX Industrial Eco Switch
5
4
3
2
1
100
LNK/ACT
+18~30V DC
+ -
PWR
The 852-111 has 5 ports with each port featuring Auto-negotiation and auto
MDI/MDI-X detection. Existing 10Mbps networks can now be upgraded ef-
fortlessly to higher speed 100Mbps Fast ETHERNET networks.
The 852-111 5-port density can be used to create multiple segments to allevi-
ate client congestion and provide dedicated bandwidth to each user node.
The 852-111 is a cost-effective solution to keep up with the constant demands
for emerging IP-based industry communication needs.
The switch can be easily configured and installed and is also ideally suited for
small to medium-sized networks.
Features:
• 5-port 10/100 Mbps Auto-negotiation ETHERNET ports
• Comprehensive front-panel diagnostic LEDs
• Supports Auto-MDI/MDI-X
• Full/half-duplex transfer modes for each port
• Wire speed reception and transmission
• Store-and-forward switching method
• Integrated address Look-Up Engine, supports 2K absolute MAC addresses
• Supports surge protection
• IEEE 802.3x flow control for fullduplex
• Supports DIN 35 rail
Description
Item no.
Pack.
unit
5-Port 100BASE-TX Industrial Eco Switch 852-111 1
Technical Data
Ports 5 x 10/100Base-TX (RJ-45)
Standards IEEE 802.3 10Base-T;
IEEE 802.3u 100Base-TX/FX;
IEEE 802.3x Flow Control
Topology Star
LED each device:
1 x Power (PWR), green;
each port:
1 x Link/Activity (LNK/ACT), green;
1 x Speed (100 Mbps), green
Supply voltage DC 18 V ... 30 V
Energy consumption max. 3 W
Operating temperature 0 °C ... +60 °C
Storage temperature -20 °C ... +80 °C
Relative air humidity (no condensation) 95 %
Dimensions (mm) W x H x L 23.4 x 73.8 x 109.2
Height from upper-edge of DIN 35 rail
Mounting DIN 35 rail
Weight 350 g