Datasheet

Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •D-32385 Minden Tel.: [phone] E-Mail: [e-mail]
25.04.2007 Hansastr. 27 •D-32423 Minden Fax: [phone] www.wago.com
PROFIBUS Fieldbus connector
B
A
B
A
1
1
2
2
3
3
4
4
5
5
6
6 7
7
8
8
9
9
390 Ω 390 Ω
220 Ω
S1
w 750
16 mm
__>
<__ 22 mm / 0.866 in
<__ 5-6 mm / 0.22 in
__>
__>
__>
<__ 7 mm / 0.276 in
<__35 mm/1.38 in__>
<______________65 mm/2.56 in__________>
<____38 mm/1.5 in____>
<_10 mm/0.39in
<_____42mm/1.65 in____>
<_ 34mm/1.34 in _>
<___33 mm/1.3 in__>
Female connector
Male connector
The fieldbus connector serves to connect a PROFIBUS device to a PROFIBUS
line.
The fieldbus connector has the following features:
• 2 horizontal cable entries. One input and one output.
• Fast and maintenance CAGE CLAMP
®
connection, can be held in the open
position with the help of an actuation slide mechanism.
• Externally operable switch to activate and/or deactivate the network
terminating resistor.
•PG interface
For the first and last station on the bus, the switch must be set to “ON”
(terminating resistor activated). Switch setting to “OFF” for the intermediate
stations on the bus (terminating resistor deactivated).
Description
Item no.
Pack.
unit
Bus connector with D-Sub male and
female connectors; 9 poles
750-970 1
Accessories
Item no.
Pack.
unit
Screwdriver with partially insulated shaft
Type 1, blade 2.5 x 0.4 mm / 0.098 x 0.016 in
210-619 1
Screwdriver with partially insulated shaft;
type 2, blade 3.5 x 0.5 mm / 0.137 x 0.020 in
210-620 1
Operating tool for strain relief
Phillips screwdriver (PH 0)
Test pin, 1 mm / 0.039 in
Test wire for soldering
735-500 1
Approvals
Marine applications GL (Germanischer Lloyd)
26 116-05 HH Cat. A, B, C, D (EMC 1)
KR (Korean Register of Shipping)
HMB05880-EL006
NKK (Nippon Kaiji Kyokai)
TA06190M
Technical Data
Double cable input min Ø 4.5 mm/0.177 in /
max Ø 8 mm/0.315 in
Data transmission rate corresponding to PROFIBUS specification
up to 12 Mbits/s
Fixing screw UNC- 2 A 4-40
Max. tightening torque 0.4 Nm
Housing color light grey
Degree of protection IP 20
Ambient operating temperature 0 °C ... +60 °C
Storage temperature -25 °C ... +85 °C
Relative humidity (without condensation) 95 %
Wire connection CAGE CLAMP
®
terminal strip with
locking slide (series 218)
0.08 ... 0.5 mm² / AWG 28 ... 20 sep.
connection 0.75mm
2
/ AWG 18 possible
Stripped length see graphic