Datasheet

750-626
1
336
Filter Module
for system and field side power supply
Delivered without miniature WSB markers
Data contacts
System power
supply
(Out)
24 V
0 V
Supply via
power jumper contacts
24 V
Status
voltage supply
-
System
- Power jumper contacts
Power jumper contacts
0 V
System power
supply
(In)
24 V
0 V
+ +
— —
13
14
C
D
B
A
750-626
—
+
+
—
0 V24 V
24 V
24 V
24 V
0 V
0 V
24 V
24 V
0 V
0 V
0 V
The WAGO-I/O-SYSTEM 750 can also be used in shipbuilding applications
and onshore/offshore installations (e.g., platforms, loading facilities). This is
possible via certification under the standards of leading agencies such as
Germanischer Lloyd and Lloyds Register. Proper system operation is ensured
(certified) by using this overvoltage protection module. The module filters the
24V system power supply and is equipped with surge suppression.
High-insulation versions are optimized for use in systems with insulation monito-
ring.
750-626/020-000
• Required for shipbuilding certified operation with both 750 Series couplers
and programmable controllers.
750-626
• Required for shipbuilding certified operation with both 758 Series IPCs and
750-625 Ex-i supply module.
• Required for the use of 750 Series PROFIsafe modules.
Description
Item No.
Pack.
Unit
24V DC Power Supply Filter with
Overvoltage (Surge) Protection, High
Isolation
750-626/020-000 1
24V DC Power Supply Filter with
Overvoltage (Surge) Protection /HI /T
750-626/025-001 1
(Operating temperature -20 °C ... +60 °C)
24V DC Power Supply Filter with
Overvoltage (Surge) Protection
750-626 1
24V DC Power Supply Filter with
Overvoltage (Surge) Protection /T
750-626/025-000 1
(Operating temperature -20 °C ... +60 °C)
Accessories
Item No.
Pack.
Unit
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Approvals
Also see "Approvals Overview" in Section 1
Conformity marking 1
Shipbuilding (versions upon request) ABS, BV, DNV, GL, KR, LR, NKK, PRS, RINA
r UL 508
r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4 750-626, -626/
4 EN 60079-0, -15
EN 61241-0, -1
I M2 / II 3 GD Ex nA IIC T4 750-626/020-000
4 EN 60079-0, -11, -15
EN 61241-0, -1, -11
I M2 Ex d I
II 3 G Ex nA IIC T4
750-626*
750-626*
II 3 D Ex tD A22 IP6X T135°C 750-626*
* Permissible operating temperature: 0°C ... +60°C
Technical Data
Voltage via power jumper contacts (max.) 24 V DC (-25 % ... +30 %)
Current via power jumper contacts (max.) 10 A DC
Current via system voltage (max.) 1.5 A (1 A up to hardware 04)
Wire connection CAGE CLAMP
®
Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14
Stripped lengths 8 ... 9 mm / 0.33 in
Width 12 mm
Weight 51 g
EMC: 1 - immunity to interference acc. to EN 61000-6-2 (2005)
EMC: 1 - emission of interference acc. to EN 61000-6-3 (2007)
EMC: marine applications
- immunity to interference acc. to Germanischer Lloyd (2003)
EMC: marine applications
- emission of interference acc. to Germanischer Lloyd (2003)
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 26.09.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Tel.: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com