Datasheet

750-1515
1
211
1.4
8-Channel Digital Output Module 24 V DC
High-side switching, 2-conductor connection
750-1515
13
14
1
2
3
4
5
6
7
8
Status
DO 1 ... DO 8
0 V
CAGE CLAMP
®
S
connection
DO 1 … DO 8
Data contacts
Power jumper contacts
1
750-1515
2
3
4
5
6
7
8
13
12
11
10
9
14
15
16
DO 1
DO 2
DO 3
DO 4
DO 5
DO 6
DO 7
DO 8
0 V
+ 24 V
0 V
0 V
0 V
0 V
0 V
0 V
0 V
0 V
24 V
0 V
270 pF
10 nF
10 nF
DO
DO
The digital output module provides 8 channels in 2-wire connection at a width
of just 12mm (0.47in).
It transmits binary control signals from the automation device to connected
actuators (e.g., magnetic valves, contactors, transmitters, relays or other
electrical loads).
CAGE CLAMP
®
S terminations provide direct insertion of solid conductors.
A green LED indicates the switched status of each channel.
An optocoupler provides electrical isolation between the bus and the field side.
210-719 operating tool (2.5mm blade) is required to open the
CAGE CLAMP
®
S.
Description
Item No.
Pack.
Unit
8DO 24V DC 0.5A, 2-conductor 750-1515 1
Interference-free for use in safety functions (see manual)
Accessories
Item No.
Pack.
Unit
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Operating tool, with partially insulated shaft,
Type 1, blade (2.5 x 0.4) mm 210-719 1
Approvals
Also see "Approvals Overview" in Section 1
Conformity marking 1
Shipbuilding ABS, DNV, GL, KR
r UL 508
Technical Data
No. of outputs 8
Max. current consumption (internal) 20 mA
Voltage via power jumper contacts 24 V DC (-25 % ... +30 %)
Type of load resistive, inductive, lamps
Max. switching frequency 1 kHz
Output current (max.) 0.5 A, short-circuit protected
Current consumption typ. (field side) 15 mA
Isolation 500 V system/field
Wire connection CAGE CLAMP
®
S
Cross sections solid: 0.08 mm² ... 1.5 mm² /
AWG 28 ... 16
fine-stranded: 0.25 mm² ... 1.5 mm² /
AWG 22 ... 16
Stripped lengths 8 ... 9 mm / 0.33 in
Width 12 mm
Weight 48 g
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 18.05.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: +49(0)571/887-0 E-Mail: info@wago.com
Fax: +49(0)571/887-169 www.wago.com

Summary of content (1 pages)