Datasheet

Interface Module
for RJ-45 Connectors
Shielded RJ-45 Cat. 6 Interface Module
Mounting adapter for DIN-rail
Description
Item No.
Pack.
Unit
RJ-45 Cat. 6 Interface Module 289-195 1
Technical Data
RJ-45 base module:
Connecting cable Min. Cat. 6
Connector 1 x RJ-45/SC-RJ shielded
Contact material CuSn
Contact plating > 0.76 μm Au over > 1.2 μm Ni
Contact resistance typ. < 50 mΩ (at 20 °C)
Min. mating cycles 750
No. of poles 8
Wire connection IDC
IDC surface treatment CuSn, tin-plated,
Cross sections Solid: 0.2 … 0.32 mm² / 24 … 22 AWG
Fine-stranded: 0.2 … 0.32 mm² / 26/7 … 22/7 AWG
Strip lengths 0.8 … 1.6 mm / 0.03 … 0.06 in
Shield contact Large area, via shield latch
Mounting adapter:
Housing color Gray
Shielding Bronze (CuSn
6
), tin coating
Contact resistance ≤ 20mΩ
Contact resistance ≤ 5 mΩ
General specifications:
Dimensions (mm) W x H x L 26.8 x 64.4 x 81.4
Height from upper-edge of DIN 35 rail
Degree of protection IP20
Ambient operating temperature -10 °C … +60 °C
Storage temperature -40 °C … +70 °C
Relative humidity < 95 % (no condensation)
Standards/specifications ISO/IEC 11801: 2011-06; IEC 60603-7;
EN 50173–1: May 2011
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes
23.10.2015
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Tel.: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com