Data Sheet
Data sheet | Item number:206-216
Variocrimp 16 crimping tool; for insulated and uninsulated ferrules; from 6
mm² to 16 mm²
www.wago.com/206-216
06.12.2018Page /1 3
Item description
Note:
Application notes:
With Variocrimp 4, the built-in crimping pressure control automatically adjusts force to the conductor cross-section used.
With Variocrimp 16, it is necessary to select the wire gauge on the tool before crimping.
Only one crimping station is needed to handle the specified conductor size range.
Uniform, compact crimping on all four sides for high conductor retention.
No need to center the conductor into the ferrule.
Conductor and ferrule insertion possible from both sides (for left- and right-handers).
Built-in ratchet mechanism ensures gas-tight crimp connection.
Crimping tools open automatically after crimping operation is complete.
Ergonomical handles.
What is a “gas-tight” connection?
In a gas-tight connection, the conductor and the ferrule are compressed, eliminating all spaces. Under normal atmospheric conditions, neither a
liquid nor gaseous medium can penetrate the crimped connection.
Oxidation between crimped single conductors is prevented, virtually eliminating the possibility of any increase in the crimped connection’s