Outdoor Coffee Table
PART LIST A C B Side Panel 2 PCS Top Panel 1 PC Rail 2 PCS HARDWARE LIST #1 #3 #2 #4 M6*15mm M6*30mm M6*45mm M6 Short Bolt 6 PCS Long Bolt 6 PCS Flat Washer 12 PCS Allen Wrench 1 PC EXTRA HARDWARE LIST #1 #2 #3 M6*15mm M6*30mm M6*45mm Short Bolt 1 PC Long Bolt 1 PC Flat Washer 1 PC 2
Step 1. Lay top panel (part B) down on a soft flat surface, such as carpet, as shown below. Attach side panel (part A) to top panel (part B) using long bolts (part #2), flat washers (part #3) and allen wrench (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. #4 #2 #3 A B #2 #3 #4 x3 x3 x1 Step 2. Attach rails (part C) to side panel (part A) and top panel (part B) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4).
Step 3. Attach side panel (part A) to top panel (part B) and rails (part C) using short bolts (part #1), long bolts (part #2), flat washers (part #3) and allen wrench (part #4). NOTE: Please fully tighten all bolts at this time. #1 #3 #4 A A #4 #2 C #3 B C #1 #2 #3 #4 Step 4. Carefully turn unit upright.
