User's Manual

1
1
Important Product Information
(DTH-1320/DTH-1620)
Wacom Cintiq Pro
PRECAUTIONS
PRECAUTIONS ON USE AND HANDLING
To ensure the safe operation of the product, be sure to follow all instructions,
cautions, and warnings found within this guide. Failure to do so could cause
damage to the product , damage to your computer, or loss of data. Failure to do
so could also void your warranty, in which case Wacom shall have no
responsibility to repair or replace the product.
PHYSICAL LOCATION
WARNING
The product is solely for normal office environments but may be used also as
center consoles in climate controlled environments. The product was tested by
Wacom for the usage in a normal office environment only and there was no
particular inspection with regards to its compatibility in medical and military
application areas.
In addition, the interactive product is neither waterproofed nor explosion resistant.
It serves and can be used solely as a passive display and input device.
In all applications that are not designated for its sole usage, no information on the
functionality and possible malfunctions of the interactive product can be supplied
due to inadequate execution of tests. The adoption of the interactive product in
other application areas than normal office environments is at the user’s risk.
CAUTION
Temperature and humidity
• Operating temperature and humidity: 5°C to 35°C, 20% to 80% RH
• Storage temperature and humidity: -10°C to 60°C, 20% to 60% RH
Do not use or store the product where:
• Temperature changes are severe or exceed specifications (e.g. outdoors or
inside a vehicle).
• The product and, the pen, are exposed to direct sunlight or heat from an
appliance, or are exposed to water or any other kind of liquid.
Do not use the product in a dusty environment; this may damage it.
USAGE
WARNING
Only use a power adapter specified for use with the product. If a different type of
power adapter is used, the product will not work properly or may be damaged.
Using a different type of power adapter also has the potential to result in fire. Use
of a different power adapter will void your warranty.
Regularly remove dust build-up from the power plug. The addition of moisture,
etc., to accumulated dust may create a fire hazard.
Do not damage, forcibly bend, or bundle the power cord. Do not place heavy
objects on the cord or expose it to excessive heat. Ignoring this warning may
result in fire, electrical shock, or product failure.
Do not connect or disconnect the power adapter with wet hands. Ignoring this
warning may result in electrical shock or product malfunction.
Do not insert foreign material into the USB port, video connector ports, or any
other opening of the product. If a metal object or foreign material is inserted into a
port or other opening of the product, it may cause product malfunction, fire, or
electrical shock.
CAUTION
Do not connect or disconnect the cable or power cables while the product or your
computer is turned on; this may damage the display or computer video card. In
this case, Wacom shall have no responsibility to repair or replace the product.
The product is for use with HDMI. Using an inappropriate HDMI cable may
damage the product.
Set up the AC adaptor and the product in a well-ventilated place. If used in a
poorly ventilated place it may overheat and cause it to malfunction, decreasing
the product life cycle.
When not using the product for long periods of time, unplug the power adapter
from the AC outlet.
Take care of the following points to protect the health of your eyes when using the
product:
• When using the product, only use it in a well lit room and view the display from
a suitable distance.
• Take regular breaks when using the product for extended periods of time.
Take care of the following points in regards to the LCD display.
Do not push down forcibly with the pen on the LCD display. Pushing down
forcibly on the display may cause ripple like striped patterns to temporarily
appear on the display (the ripples disappear when you stop pushing down with
the pen). The following conditions are characteristics of LCD displays and do not
indicate damage or malfunction to the product.
• Depending on the displayed contents, uneven brightness may be produced.
• Depending on the displayed contents, a small portion of lit and unlit red or
blue dots may be visible.
• When displaying objects with delicate patterns, flicker or striped patterns may
be produced.
• After displaying the same still image for an extended period of time, a residual
image may be produced. (Residual images will gradually disappear over time.)
• Changes to the condition of the back light over the period of using the display
will gradually affect the condition of the display.
• Depending on the angle that from which the display is viewed, the colors and
hues may appear changed.