Specification Sheet

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. MAY 2016
MULTIPOINT – model: QMP-G3RE
Quick Connect™ Canopy
PRODUCT DESCRIPTION
Quick Connect™ multipoint canopy for use with low voltage Quick Connect™ QP series pendants and QF series track heads.
Designed to be installed on ceilings or wood surfaces.
FEATURES SPECIFICATIONS
• 3 x 1W minimum load required
• 3 x 60W Integral electronic transformers
• Smooth and continuous ELV dimming
• Power: Contains 60W integral 12V electronic transformers (3)
Electronic transformers have advanced auto-reset, soft start and short circuit
protection features. The soft start delayed lamp start feature extends lamp life
by delaying the abrupt inrush current to the lamp.
• Standards: UL & CUL listed
• Mounting: Mounts over a standard 4” junction box. Base plate covers junction
box opening, the canopy attaches to base plate with three screws. There are
two trade sized knockout on the base plate.
• Materials: Etched glass fascia plate as a decorate element. Back plate is
galvanized steel. Three transformers (model EN-1260-R-AR) are electronic
low voltage, pre-wired into three quick connect adaptors. Mounting hardware,
including screws and wire nuts.
ORDER NUMBER
Model # Finish
QMP-G3RE MR Mirror
QMP-G3RE – MR
Example: QMP-G3RE-MR
Fixture Type:
Catalog Number:
Project:
Location:
24"
1w"
26"
42”
23w”