Use Instruction

Product Specification
Problem Reference
5
6
1
4
3 2
Contents included:
• 1pc Wireless Mouse
• 1pc USB Receiver (Stored in the battery compartment)
How To OperatePart Name
Open the Battery Cover on the battery compart-
ment, insert 2pcs "AAA" batteries (not included, need
to purchase additionally), and remind to check for the
correct polarity (+/-).
6
1.
Take out the USB receiver and secure the Battery
Cover to the battery compartment.
6
2.
The DPI switch button allows you to switch between
the different DPI-modes (1000DPI, 1200DPI and
1600DPI).
NOTE: To avoid any loss of this receiver during
transport, we suggest to insert the receiver into the
battery compartment on the bottom of this device
when it isn’t in use.
The batteries used with this product are small
parts and should be kept away from small
children who still put things in their mouths. If
they are swallowed, promptly see a doctor and
have the doctor phone American Association of
Poison Control Centers (1-800-222-1222).
Always purchase the correct size and grade of
battery most suitable for intended use.
Do not mix old and new batteries, alkaline,
standard (Carbon - Zinc) or rechargeable
(Nickel-cadmium) batteries.
Clean the battery contacts and those of the
device prior to battery installation.
Ensure the batteries are installed correctly with
the regard to polarity (+/ -).
Always remove batteries if consumed or if
product is to be left unused for a long time.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
- "WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment."
- "NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment gener ates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
inter ference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experiencd radio/TV technician
for help."
1. Mouse does not respond
• Is the mouse SENSOR light on?
(No light, check if the battery has electricity, and
whether the positive and negative poles are
reversed.
• Did the receiver recognize success?
(Identification failed, change a USB interface, Or
reload the drive.)
2. Overcoming
• Is the mouse and desktop smooth?
(If not please put it in smooth surface.)
• Is the battery low?
(If the battery is low, please replace the battery.)
• Key number: 4D
• Receiver: USB2.0
• DPI: 800-1200-1600
• Operating temperature: -5ºC ~ 40ºC
• Relative humidity: 20% ~ 90%
• Maximum speed: 28in/sec
• response rate: 125Hz
• Operated by 2pcs AAA batteries
(not included, need to purchase additionally)
• Working current: <10mA
• Product Size: 4.45"x2.2"x 1"
• Compatible system:
WinXP/Win7/Win8/Win10/Macos
Turn on your computer and connect the USB receiver
to the USB port of your computer, wait a minute until
the device has been automatically detected and
installed (Plug and Play). When installation is
completed, you can use the device.
3.
1.
2.
3.
4.
5.
6.
4.
Slim Wireless Mouse
Instruction Manual
Item Number: MU21002
1
2
3
4
5
6
Left Key
Right Key
Roller
DPI Button
Sensor
Battery Cover
WARNING: To Avoid Battery Leakage
Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106
Made in China
Front
Back
Instruction Sheet Size: A5