User Manual
1. HOW TO OPERATE 1.1 Charging Put the watch unto the charging base, align the metal contacts on the back of the watch with the gold pins on the charging base while placing, then tightly press the watch to make sure it does not fall off the base. Insert one end of the USB into the charging base, and the other end into a computer, charging dock or power bank for charging. Input voltage: 5V DC. Charging time: about 2 hours. 1.2 Power On Press and hold on the right button to power on. 1.
watch; 2.Buckle the new watch strap into the smartwatch making sure its properly aligned; 3.Gently pull the strap to assure it is buckled correctly. 2. INTRODUCTION FOR IMPORTANT FEATURE 2.1 Heart rate monitoring Life Watch contains PPG heart rate sensor and combines it with HR algorithms, which accurately monitors your heart rate during exercise. in order to monitor heart rate more accurately, please wear the watch approximately one finger away from the wrist bone.
2.4 Illumi-Run 1 Enter the Running interface; You can turn on or off the lllumi-Run. 2. Color display of the screen will change with your heart rate. Red: Extreme Pink: Anaerobic Orange: Aerobic Green: Fat-burning Blue: Warm-up 1.The definition of heart rate zone is individualized. Please set the personal information in App accurately; 2.The screen will flash with the pace of the steps taken; 3.
The waterproof level of Life Watch is IP68 . Note: 1. Swim, shower and washing hands only under cold water. 2. Life Watch does 门 ot have a waterproofing effect on seawater, acid and alkaline solution, chemical reagents and other corrosive liquids. If inadvertently encounter or contact with corrosive liquid, please clean with clear water and dry the device. The damage caused due to improper use 〇「abuse of the device is not within the scope of the warranty.
charging terminal when charging the device, which will also hinder the transmission of data and affect the charging. 1.Gently wipe the device by using a cotton cloth with a mild neutral detergent; 2.Please allow the device to dry completely after cleaning. Contact information Vyvo Inc. address; 5201 Great America Parkway, Suite 440 Santa Clara, CA, 95054 USA email; info@vyvo.com phone; +86 755 26607980 囡 o K Type BF Applied Part Environmental protection Read this manual before use.
•The product is suitable for adults (weight should be between 40 kg to 110 kg). •The oximeter may not work for all users. If you are unable to achieve stable readings, discontinue use. •Do not expose the device to a heat source or in a high-temperature location, for example, in an unattended vehicle in the sun. To avoid the possibility of damage, remove the device from the vehicle or store it out of direct sunlight, such as the glove box.
Contraindications Do not use in case of known skin allergies to any of the materials indicated in the “List of Patient-Contacting Materials”. Storage conditions Life Watch is best preserved in a ventilated and clean environment without corrosive objects, warehouse management temperature and humidity,the best control in 5-28 C°, relative humidity :20%-75%. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.