Mobile Thin Client Hardware User's Guide Winlinx Family Mobile Thin Client Terminal Hardware User's Guide
Mobile Thin Client Hardware User's Guide ii
Mobile Thin Client Hardware User's Guide Copyright Notice © 1998 VXL Instruments Limited. ALL RIGHTS RESERVED. Document Number : 600010118080 Z00 1st Edition, July'99 Printed in INDIA Information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer.
Mobile Thin Client Hardware User's Guide FEDERAL COMMUNICATION COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Mobile Thin Client Hardware User's Guide CONTENTS INTRODUCTION OVERVIEW ................................................................................ 1 FEATURES................................................................................. 2 Optional Features .................................................................... 2 INSTALLATION SITE REQUIREMENTS ............................................................... 3 PRECAUTIONS & SAFETY REQUIREMENTS ............................. 3 WARNING.....
Mobile Thin Client Hardware User's Guide 10/100BASE-T LAN Interface ................................................. 10 Video Port ............................................................................. 11 Mouse / Keyboard Port........................................................... 11 Audio / Microphone Port ......................................................... 11 CABLING REQUIREMENTS...................................................... 12 10/100BASE-T Cabling ..............................
Mobile Thin Client Hardware User's Guide Chapter-1 INTRODUCTION OVERVIEW Thank you for purchasing Mobile Thin Client Terminal for Windows.
Mobile Thin Client Hardware User's Guide FEATURES The Winlinx Thin Client terminal: • utilizes an industry standard 200MHz Cyrix MediaGXm MMX high speed processor with 64MB DIMM memory (expandable to 128MB) • offers high speed windows performance. • provides secure access to network resources. • provides extremely low administration costs. • supports high resolution up to 1280x1024, 256 colours. • has a 10/100Base-T Ethernet port. • has dual high-speed serial ports and a parallel port.
Mobile Thin Client Hardware User's Guide Chapter-2 INSTALLATION The Thin Client carton contains: • Thin Client unit • DC inlet & outlet Plug • Earth wire • Mouse • Hardware User's Guide (which you are currently reading) Note: Trans-shipment should be done in original packing to avoid damage during transit. Please retain the original carton and packaging material for future use.
Mobile Thin Client Hardware User's Guide WARNING The wires in this power cable are colored in accordance with the following code :+12V - YELLOW 12V GND - BLUE +5V - RED 5V GND - BLACK - YELLOW / GREEN Do not reverse or short circuit the output & input terminals. WALL MOUNTING The Mobile Thin Client can be mounted on the wall. This allows better utilization of space. When the unit is to be wall mounted, the rubber bushes on the bottom side have to be removed, as shown in the figure below.
Mobile Thin Client Hardware User's Guide CONNECTING THE THIN CLIENT Before connecting any cables, ensure that the power switch located on the front panel is in OFF position. Figure 3 Rear Panel of the Thin Client with 16 Bit Stereo output Rear Panel Overview The following table gives the connector symbols printed on the back panel and corresponding external cable connection. Connector Symbol Connection Cable IN DC power input 12V D.C 6A OUT DC power output 5V D.C 2.
Mobile Thin Client Hardware User's Guide Connector Symbol Connection Cable 1 Serial COM1 2 Serial COM2 Parallel Printer 16 Bit Stereo line output Microphone input Refer to "Appendix-B, Connectors & Cabling Information" for more details about the connectors and cables. TROUBLE SHOOTING The following is a list of general problems and their solutions. 1) When switched on, Power LED does not glow • Ensure that the battery is properly connected.
Mobile Thin Client Hardware User's Guide Appendix-A SPECIFICATIONS HARDWARE Processor Cyrix Media GX MMX 200MHz VGA Memory Shared Video Memory upto 2.5MB display RAM RAM 64MB Power Management VESA display power management MECHANICAL Height 70 mm Width 348 mm Depth 328 mm Weight 4.
Mobile Thin Client Hardware User's Guide ELECTRICAL Power Inlet Power Outlet Power 12V D.C. 5V D.C. 6A + 10% 2.2A 60 W max INTERFACE 8 § COM1/COM2 Serial Ports − RS232C compatible operating at 115.2K baud maximum § 10/100Base-T Port − LAN interface § Printer Port (Parallel) − Centronics compatible, 25 pin D-type female § Mouse / Keyboard Port − PS/2 compatible § Video Port − SVGA compatible supporting 1024 x 768, 800x600, 640x480 resolutions, 256 colors.
Mobile Thin Client Hardware User's Guide Appendix-B CONNECTORS & CABLING INFORMATION CONNECTORS The following tables provide pin details for the Thin Client connectors. Refer to the chapter INSTALLATION for the location of the connectors on the back panel.
Mobile Thin Client Hardware User's Guide Printer Port (Parallel) 25 Pin D-type Female connector.
Mobile Thin Client Hardware User's Guide 5 1 Video Port 15 Pin D-type Female Connector 10 6 15 11 Pin Signal Pin Signal Pin Signal 1 Red 6 Red return GND 11 No Connection 2 Green 7 Green return GND 12 No Connection 3 Blue 8 Blue return GND 13 Horizontal Sync 4 No Connection 9 No Connection 14 Vertical Sync 5 GND 10 No Connection 15 No Connection Mouse / Keyboard Port PS/2 Mouse / Keyboard Connector Pin Signal Pin Signal 1 Mouse / KBD data 4 VCC 2 NC 5 Mouse /
Mobile Thin Client Hardware User's Guide CABLING REQUIREMENTS 10/100BASE-T Cabling Cross Connection - (Without Hub) RJ45 Pin RJ45 Pin TXD+ 1 3 RXD+ TXD- 2 6 RXD- RXD+ 3 1 TXD+ RXD- 2 TXD- 6 Straight Connection - (With Hub) RJ45 Pin 12 RJ45 Pin TXD+ 1 1 TXD+ TXD- 2 2 TXD- RXD+ 3 3 RXD+ RXD- 6 6 RXD-
Mobile Thin Client Hardware User's Guide COM1/COM2 (Serial Port) Cabling Serial devices like modems and printers use 25 pin D-type connector for RS232 connections. In order to connect RS232 device with 25 pin connector, 9 pin connector signals are to be converted to 25 pin connector. The diagram below shows their respective connections.
Mobile Thin Client Hardware User's Guide Printer Cabling The table below gives the pin connections of the Standard Centronics parallel cable. Some manufacturers have changed pin functions or polarity on their printers, for such printers custom cables may be necessary. For details Refer to your printer manual for interfacing details.
