User's Manual

ManualsBrandsVxion ManualsElectronicsWireless PS4 Controller

Wireless PS4 Controller

1.Instructions:

User Manual

Make sure you read this guide before using the wireless racing controller.

Please note! Fully charge the racing controller before the first use.

3.Specification:

External Dimensions:160*105*62mm

Charging Voltage: DC5V/500mA

Net Weight:197g

4.Pack Contents:

1 X Wireless Controller

1 X User Manual

1 X Data Charging Cable

5.CAUTION

6.FCC Statement

The product is not water proof. Please keep it away from water, high

humidity and high temperature environment.

DO NOT attempt to modify or disassemble this product.

DO NOT slam or hit this product hard, there may be some unnecessary

damage for it.

Due to violation of above operations,warranty is invalid.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions (1)this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

1.Power ON/OFF:

Power ON: Short press the PS key and the indicator will be fast flash accordingly,

if it is unconnected for 20 seconds, it will be off automatically.

Power OFF: When it’s working, press and hold the PS key for 5 seconds, and the

indicator turns to out.

2. Pairing operation guide:

Wired pairing mode: Plug the TYPE-C cable to the PS4 console to complete pairing,

the indicator is green and always on. Then press the PS button to start wireless

connection. After connection, the indicator will flash regularly indicates it is charging.

Wireless pairing mode: When first use, please press and hold SHARE key, then press

the PS key for 3 seconds, the indicator will fast flash to enter pairing mode, If the

pairing is successful, the light will be always on.

It has paired memories, just press the PS key to reconnect the device after first

successful connection.

Options

Mute

Program

D-pad

R1/R2 L1/L2

Steering

wheel

3.5 mm Headset Jack

Reset

2.Operation Guide of Remappable Keys:

First Step: Press and hold PROGRAM key, then press the M key you want to

program, color of the indicator will turn red to enter setting mode.

Second Step: In the setting mode, press a key you want to remap.

Last Step: Press the M1 again and the indicator will turn green to exit the setting

mode.

Clear the content mapped in the M key

1.Press and hold PROGRAM key, then press the M key, the color of the indicator will

turn red.

2.Then press the M again and the indicator will turn green to exit the setting mode

3.If you re-map the M key, will record the new content automatically.

NOTED! The other M key will be set up the same as above steps. And they are

independent and do not interface with each other.

3. Charging indicator:

Disconnection charging: Connect a charger to Type-C port, the indicator is green and

flashes very slowly, and it will go out when fully charged.

Connection charging: When it’s working, connect a charger to the Type-C port, the

indicator is green and flashes regularly, it will be always on when fully charged.

4. Operation guide of Mute key:

When it’s working, press the Mute key to close the microphone and the indicator turns

red accordingly. If you press the Mute key again to exit and the indicator returns

green.

1 2

All the below buttons can be mapped:

L2 R2