Installation Manual

ATTENTION: Every time when you Double Press
the Bluetooth Panic Button, depending on the
conguration, it will either trigger the VBOT-1 device
to call the preset Emergency Number, or it will send
a video-based emergency message to the back-end
system.
4. Hide the cable into the ceiling fabric and the seal
of the door
5. Use zip-ties to tide the rest of the cable, and fasten
the Power Adaptor under the dashboard.
ATTENTION: If you are installing on a truck or bus,
where the attached base cannot provide the ideal
installation angle, please contact VURO support for
the special base for truck/bus.
INSTALLATION MANUAL
Register Vehicle and Drivers
Use the “VURO Installation”
App to register the vehicle to
the VURO backend system. The
information includes
• License Plate Number
• Vehicle VIN
• Make
• Model
• Year
Use the “VURO Installation” App
to register the drivers to the VURO
backend system.
• First Name
• Last Name
• Driver License Number
• Email
• Phone
1. If not yet, please download the “VURO Installation”
App from Google Play or Apple Store, so you can
connect to the VBOT-1 device to view the live video
stream.
2. Adjust the installation location according to the
live stream, and make sure neither the road nor driver
camera is blocked by anything.
3. Remove the sticker on the base cover and press
rmly to the windshield.
Hide The Cable
1. Put the battery into the Bluetooth
Panic button, and the button will start
to blink.
2. Wait until you hear “Bluetooth
button” from the VBOT-1 device. If not,
long press the Bluetooth Panic button
until you hear the sound.
3. Fasten the Bluetooth button to the
place where the driver has easy access.
4. Plug the provided Bluetooth OBDII
Reader to the OBDII port of the vehicle.
The Red status light on the reader
should be ON.
5. Wait until you hear the sound “OBD
Reader Paired” from the VBOT-1 device.
Connect The BT Devices (Optional)
CONTACT US
[e-mail]
www.vurotech.com
Connect The BT Devices (Optional)
Model:V-BUTTON
FCC ID:2AUBHV-BUTTON