Quick Start Guide

Overview
What’s in the box
RM7764HD
7-inch Smart Wi-Fi 1080p
Pan and Tilt Monitor
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
latest VTech product news.
BC
Installation guide
What does HD Video Monitor do?
VTech 7-inch Smart Wi-Fi 1080p Pan and Tilt Monitor allows you to stay close to your baby when
you are on the move or away.
This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and
audio through the HD camera unit and 7-inch color screen parent unit. It allows you to maintain
a constant connection to your baby.
You can also monitor from your smartphone and mobile tablet.
VTech 7-inch Smart Wi-Fi 1080p Pan and Tilt Monitor uses MyVTech Baby 1080p app to let you
instantly see and hear what’s happening with your baby from anywhere in the world.
The app can be downloaded from the App Store or the Google Play
TM
Store, directly from your
smartphone or mobile tablet.
Congratulations
on purchasing your new VTech product. Before using this HD video monitor, please read
Important safety instructions.
For support, shopping, and everything new at VTech, visit our website at
www.vtechphones.com. In Canada, visit www.vtechcanada.com.
How the system works
1
Connect, charge and power on
the baby monitor
Protect your privacy and
online security
Frequency Camera unit: 2412 - 2462 MHz
Channels 11
LCD 7’’ Color LCD
(IPS 1200x800 pixels)
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may
vary according to environmental conditions at the time of use.
Power requirement 1. Parent unit power adapter:
Output: 5V DC 1000mA
2. Parent unit: 3.7V Lithium-ion battery
Camera unit power adapter:
Output: 5V DC 1000mA
Google Play and the Google Play logo are trademarks of Google LLC.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
Specifications are subject to change without notice.
© 2019 VTech Communications, Inc.
All rights reserved. 11/19. RM7764HD_IG_V1
Document order number: 91-011946-010-100
Technical specifications
x 2
x 2
Installation guide Important safety
instructions
Quick start guide
Camera unit overview
Your HD video monitor package contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.
Local mode
The Parent unit and the camera unit of your video
monitor connect to each others in Local mode
by default, which allows you to stream live video
right out of the box. Local mode connection lets
you stream live video from parent unit only.
• You may experience reduced signal strength if your
parent unit and camera unit are far apart, or there are
obstructing factors, such as internal walls, between
them. Move the parent unit closer to the camera
unit to improve the signal strength. You can also set
up Remote mode to connect via your home Wi-Fi
network to improve the connection between your
parent unit and camera unit.
Remote mode
You can continue using your video monitor with
Local mode connection, or you can set up your
monitor in Remote mode connection.
Remote mode uses your home Wi-Fi network to
connect your video monitor. It supports streaming
live video through parent unit and smartphone
app.
We recommend that you set up your monitor in
Remote mode to enjoy streaming live video via
your parent unit with better connection.
If you want to stream live video remotely with
your mobile device, download and install the
MyVTech Baby 1080p mobile app. With the
mobile app, your Wi-Fi router (not included)
provides Internet connectivity to your HD video
monitor system. It serves as a communicating
channel between your camera unit and mobile
device, allowing you to monitor and/or control
your camera unit wherever you are. For detail, see
Mobile access section in the quick start guide.
VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of
industry-recommended best practices to help keep your wireless connection private and
your devices protected when online. We recommend you carefully review and consider
complying with the following tips.
Ensure your wireless connection is secure.
• Before installing a device, ensure your router’s wireless signal is encrypted by selecting
the “WPA2-PSK with AES” setting in your router’s wireless security menu.
Change default settings.
• Change your wireless router’s default wireless network name (SSID) to something unique.
• Change default passwords to unique, strong passwords. A strong password:
- Is at least 10 characters long.
- Is complex.
- Does not contain dictionary words or personal information.
- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.
Keep your devices up to date.
• Download security patches from manufacturers as soon as they become available. This
will ensure you always have the latest security updates.
• If the feature is available, enable automatic updates for future releases.
Disable Universal Plug and Play (UPnP) on your router.
• UPnP enabled on a router can limit the effectiveness of your firewall by allowing other
network devices to open inbound ports without any intervention or approval from you.
A virus or other malware program could use this function to compromise security for the
entire network.
For more information on wireless connections and protecting your data, please review the
following resources from industry experts:
1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips
–
www.fcc.gov/consumers/guides/how-protect-yourself-online.
2. U.S. Department of Homeland Security: Before You Connect a New Computer to the
Internet –
www.us-cert.gov/ncas/tips/ST15-003.
3. Federal Trade Commission: Using IP Cameras Safely –
https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.
4. Wi-Fi Alliance: Discover Wi-Fi Security –
http://www.wi-fi.org/discover-wi-fi/security.
Connect the baby monitor
• The rechargeable battery in the parent unit is built-in.
• Use only the power adapters supplied with this product.
• Make sure the parent unit and the camera unit are not connected to the switch controlled electric
outlets.
• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not
designed to hold the weight of the parent unit and the camera unit, so do not connect them to any ceiling,
under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the camera unit and the power adapter cords are out of reach of children.
• To maintain compliance with the FCC’s RF exposure guidelines, place the camera unit at least 20cm from
nearby persons.
Charge the parent unit battery
The parent unit runs on rechargeable battery or AC power. To continuously monitor your
baby, keep the parent unit connected to AC power. With the battery alone, the parent unit can
cordlessly run for a short time only.
Parent unit overview
1 LINK LED light
• On when the parent unit is linked to the
camera unit.
• Flashes when the link to the camera unit
is lost.
2
LED light
• On when the parent unit is connected to
AC power, or the battery is charging.
• Flashes when the parent unit battery is
low and needs charging.
• Off when the parent unit is
disconnected from AC power.
3 3- level sound indicator light
• Green on when low sound level is
detected by the camera unit.
• Green and amber on when moderate
sound level is detected by the camera
unit.
• Green, amber and red on when high
sound level is detected by the camera
unit.
4 TALK
• Press and hold to talk to the camera unit.
• While in a submenu, press to exit.
5
• Press to zoom in/out.
6 Arrow keys
• While in a menu, press to choose an
item.
, , or
• Press to move the selection box
leftward, upward, rightward or
downward.
• While viewing image from the camera
unit, press and hold to pan the
camera unit camera leftward, upward,
rightward or downward.
• While viewing zoomed image,
press and hold to move the zoomed
image leftward, upward, rightward or
downward.
7 MENU/SELECT
• Press to enter the main menu.
• While in a menu, press to choose an
item, or save a setting.
8 - VOL/ VOL +
• Increase or decrease parent unit’s
volume.
9 Microphone
10 POWER key
11 Power jack
12 RESET
• Force reboot the parent unit.
13 Antenna
14 Speaker
15 Stand
1 Light sensor
2 Camera lens
3 Microphone
4 Infrared LEDs
• Allow you to see clearly in a dark
surrounding.
5 LED indicator
• Red is steady on when the camera unit is
booting up.
• Amber is steady on when the camera
unit is connecting to the parent unit
directly in local mode.
• Green is steady on when the camera unit
and parent unit are connecting to your
home Wi-Fi network via the Wi-Fi router.
• Flashes amber slowly during video
streaming in local mode.
• Flashes green slowly during video
streaming via home Wi-Fi network.
6 ON/OFF
• Power on/off switch.
7 Speaker
Caution
• For hearing protection, do not stand
close to the HD camera when the
camera’s alarm goes off. The loud
alarm may damage your hearing.
8 Power jack
9 Temperature sensor
10 Slots for wall mounting
11 PAIR
• Press and hold to reset the camera unit
to factory default.
For mobile access:
Network Wi-Fi
Wi-Fi router 2.4GHz 802.11 b/g/n
Internet connection
1.5 Mbps @ 720p or 2.5 Mbps @1080p upload
bandwidth per camera
MyVTech Baby 1080p mobile app Connect up to 10 camera units
Requirements
1
2
3
5
6
4
7
8
9
10
11
1
2
3
5
6
4
7
8
9
10
11
1
2
3
5
6
4
7
8
9
10
11
Slide the ON/OFF switch
leftward to power on your
camera unit.
• Your parent unit detects the connection
signal strength. If you have connected
your video monitor with your home Wi-Fi
network, your parent unit automatically
switches to local or remote mode - the
one that has stronger signal strength.
2
1
3
4
5
6
7
8
9
12
13
14
15
11
10