User Guide
Contents Product Specifications Components XLCgo Overview Charging Your XLCgo Getting Started Pairing Your XLCgo with a Mobile device Pairing Your XLCgo with DECT devices 1 2 2 3 4 4 5 5 6 8 10 13 E N G L I S H
E 10 meters with no obstructions 32F-104F Around 3 hours Up to 10 hours Up to 100 hours LITHIUM-ION POLYMER, 3.
Components Thank you for choosing the Clarity XLCgo. Inside the package, you should find: 1 XLCgo main unit 1 Charging Cradle 1 USB cable 1 Air Vent Holder 1 User Guide 1 Lanyard XLCgo Overview 2 8. Audio Mode Switch 1. Pairing Button 9. Charging Socket 2. Tone Button 3. Volume Wheel 10. 3.5mm Headphone Jack 4. Answer on/off 5. Boost Button 6. Mute/ringer off Button 7.
Charging Your XLCgo Before using your XLCgo for the first time, please plug the charger into the power source and connect the other end to the charging socket on XLCgo or place in charging cradle to fully charge the battery. Status Status Indicator 2. Fully charged Green light steady then off 1. Charging 3. Low battery 4.
Getting Started Turning Your XLCgo On and Off: A. Turning on Push the power switch up B. Turning off Push the power switch down Pairing Your XLCgo with a mobile device 1. Press and hold the Pair button on the side of the XLCgo until the pairing light starts flashing red and blue and you hear "Start pairing with mobile device." 2. Open the settings on your mobile phone so that it begins searching for new devices. 3. Place the XLCgo and your device where they are close to each other. 4.
Pairing XLCgo with Clarity DECT devices XLCgo pairs with the following Clarity DECT devices as an expandable speakerphone: XLC8, XLC7BT, XLC3.4+ and XLC4. 1. Step one: Enter pairing mode on DECT base • Press and hold the [FIND] key on base for 5 seconds, until the visual ringer starts flashing 2. Step two: Enter pairing mode on XLCgo • Turn on XLCgo.
Using Your XLCgo 1. Answer/End Calls Press green answer key once 2. Adjust volume Roll the Volume up or Volume down to increase/decrease the volume. 3. Boost Volume Press the boost button to add additional volume to your phone calls 4. Audio Modes Use this switch to change the audio mode 5.
Using Your XLCgo a. Please use the mobile phone for DIALING/HOLD/REJECT and other functions. b. XLCgo is designed to work with mobile phones; the compatibility of some features is not guaranteed for all devices.
Troubleshooting I cannot pair with my mobile phone - Ensure your XLCgo is powered on and fully charged - Ensure the pairing function is turned on on your phone - Ensure XLCgo is in pairing mode (flashes blue and red) - Ensure XLCgo is in range of your phone. If the above steps do not solve the problem, please turn off XLCgo and recharge it, and.then -try again.
If the above steps do not solve the problem, turn off XLCgo and reset it, then pair XLCgo with your phone again. I hear a “Battery Low” alert during the call, what happens? - This is the Low battery alert. Please charge XLCgo. I hear some noise during the call, why? - There is an obstruction between XLCgo and your mobile. Please remove it. Alternately, try relocating the phone and don’t hold it in your hand.
Safety Instructions To reduce the risk of fire, electric shock, injury to persons and damage to property, read all operating instructions and the following safety instructions before using your Clarity product. Operating, storage and charging temperature is 10˚C to 40˚C (50˚F to 104˚F). • Only use those Clarity products and accessories designed for use with this product. • If you experience a skin irritation after using this product, discontinue use and contact Clarity. • CHILDREN.
If you experience hearing discomfort, you should stop listening to the device through your XLCgo and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you: 1. Set the volume control in a low position before using your XLCgo and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your XLCgo in a quiet environment with low background noise. 3.
Charging Warnings • Use only the charger supplied by Clarity to charge the product and follow the charging instructions provided. Do not use the charger for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use. Battery Warnings • Do not dispose of the product in a fire or heat above 40°C (104°F), or mechanically crushing or cutting of battery that can result in an explosion. • RECYCLING The product must be recycled or disposed of properly.
Regulatory/Compliance Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada statement This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Clarity Products LLC 6131 Preservation Drive • Chattanooga, TN 37416 Tel: 800-426-3738 • Fax: 800-325-8871 Website: www.clarityproducts.com ©2020 Clarity Products LLC. Clarity is trademark of Clarity Products LLC. registered in the US and other countries. XLCgo, XLC8, XLC7BT, XLC3.4+ and XLC4 are trademarks of Clarity Products LLC.